Transmit and Receive LTE Signals Using USRP E3xx

This example uses:

Communications Toolbox Support Package for USRP Embedded Series Radio Communications Toolbox Support Package for USRP Embedded Series Radio

You can combine the Communication Toolbox™ Support Package for USRP™ Embedded Series Radio with the LTE Toolbox™ software to transmit and receive LTE signals using your supported SDR.

These examples show how to generate LTE waveforms for transmission onto the air and how to process received data to decode LTE signals (requires LTE Toolbox).

The LTE Transmitter Using Software Defined Radio (LTE Toolbox) example shows how to generate a reference measurement channel (RMC) downlink LTE waveform and transmits the generated waveform over the air using an SDR.
The LTE Receiver Using Software-Defined Radio (LTE Toolbox) example shows how to recover the MIB and basic system information from an LTE downlink waveform that is received from the air using an SDR.