Main Content

Variable Thermal Resistance

Variable resistance in thermal systems

  • Library:
  • Simscape / Foundation Library / Thermal / Thermal Elements

  • Variable Thermal Resistance block


The Variable Thermal Resistance block lets you model a variable heat transfer process in generalized terms, independent of whether it is by conduction, convection, radiation, or a combination thereof. Thermal resistance is an abstract quantity that relates the thermal conductivity, the heat transfer coefficient, and the radiation coefficient. Thermal resistance of this block can vary with time, according to the input physical signal at port R.

The heat transfer equation for the Thermal Resistance block is:



  • R is the thermal resistance.

  • Q is the heat flow rate.

  • ΔT is the temperature difference between layers.

Thermal resistance is related to the other heat transfer quantities as follows:



  • D is material thickness, that is, distance between layers.

  • A is area normal to the heat flow direction.

  • k is thermal conductivity of the material.

  • h is convection heat transfer coefficient.

  • r is radiation coefficient.

  • TA and TB are temperatures at ports A and B, respectively.


To set the priority and initial target values for the block variables prior to simulation, use the Variables tab in the block dialog box (or the Variables section in the block Property Inspector). For more information, see Set Priority and Initial Target for Block Variables.



expand all

Input physical signal that specifies the thermal resistance value.


expand all

Thermal conserving port associated with layer A.

Thermal conserving port associated with layer B.


expand all

If the input physical signal falls below this value, the resistance remains at this value.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Introduced in R2017b