Implement DC voltage source
Simscape / Electrical / Specialized Power Systems / Fundamental Blocks / Electrical Sources
The DC Voltage Source block implements an ideal DC voltage source. The positive terminal is represented by a plus sign on one port. You can modify the voltage at any time during the simulation.
The amplitude of the source, in volts (V). Default is
Voltage to measure the voltage across the terminals of
the DC Voltage Source block. Default is
Place a Multimeter block in your model to display the selected measurements during the simulation. In the Available Measurements list box of the Multimeter block, the measurement is identified by a label followed by the block name:
example illustrates the simulation of the transient response of a first-order RC circuit.