Main Content

SFFM Voltage Source

Single-frequency frequency-modulated voltage source

  • Library:
  • Simscape / Electrical / Additional Components / SPICE Sources

  • SFFM Voltage Source block

Description

The SFFM Voltage Source block represents a frequency-modulated AC voltage source whose output voltage value is independent of the current through the source. The following equation describes the output voltage as a function of time:

Vout = VO+VA*sin((2π*FC*Time)+MI*sin(2π*FS*Time))

where:

  • V0 is the Voltage offset, VO parameter value.

  • VA is the Voltage amplitude, VA parameter value.

  • FC is the Carrier frequency, FC parameter value.

  • MI is the Modulation index, MI parameter value.

  • FS is the Signal frequency, FS parameter value.

Ports

Conserving

expand all

Electrical conserving port associated with the SFFM voltage source positive voltage

Electrical conserving port associated with the SFFM voltage source negative voltage

Parameters

expand all

Magnitude of the time-independent part of the output voltage.

Magnitude of the sinusoidal part of the output voltage.

Frequency of the carrier wave. The value must be greater than or equal to 0.

Amount by which the modulated signal varies around its unmodulated level. The value must be greater than or equal to 0.

Frequency of the modulated signal. The value must be greater than or equal to 0.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Introduced in R2008a