To tell whether a model needs saving, look at the title bar in the Simulink® Editor. If a model in the model hierarchy needs saving, an asterisk appears in the title bar (known as the dirty flag: *).
To determine programmatically whether a model needs saving,
use the model parameter
Dirty. For example:
if strcmp(get_param(gcs,'Dirty'),'on') save_system; end
To save a model for the first time, in the Simulink Editor, on the Simulation tab, click Save. Provide a location and name for the model file. For name requirements, see Model Names.
To save a previously saved model:
To replace the file contents, in the Simulink Editor, on the Simulation tab, click Save.
To save the top model with a new name or location, or to change from MDL to SLX format, in the Simulink Editor, on the Simulation tab, select Save > Save As.
For details about the SLX format, see Upgrade Models to SLX.
To save a referenced model with a new name, location, or format, open it as a top model, then on the Simulation tab, select Save > Save As.
To save the top model in a format compatible with the earlier version, on the Simulation tab, select Save > Previous Version. See Export a Model to a Previous Simulink Version.
A language keyword (e.g.,
A reserved name:
A MATLAB® software command
The total number of characters in the model name must not be greater than a certain
maximum, usually 63 characters. To find out whether the maximum for your system is greater
than 63 characters, use the MATLAB
To understand how MATLAB determines which function to call when you specify a model name, see Function Precedence Order.
Simulink saves the model (block diagram) and block properties in the model file.
If you have any pre- or post-save functions, they execute in this order:
PreSaveFcn callback routines
execute first, then the model
Simulink writes the model file.
routines execute, then the model
During the save process, Simulink maintains a
temporary backup copy (named
for restoring in case of an error. If an error occurs during saving
or during any callback during the save process, Simulink:
Restores the original file
Writes any content saved before the error occurred
in a file named
Issues an error message
When saving a model loaded from an SLX file, the original SLX file must still be present. Simulink performs incremental loading and saving of SLX files, so if the original file is missing at save-time, Simulink warns that it cannot reconstruct the file fully.
Simulink saves new models and libraries in the SLX format
by default, with file extension
.slx. SLX is a
compressed package that conforms to the Open Packaging Conventions
(OPC) interoperability standard. SLX stores model information using Unicode® UTF-8
in XML and other international formats. Saving Simulink models
in the SLX format:
Typically reduces file size compared to MDL. The file size reduction between MDL and SLX varies depending on the model.
Solves some problems in previous releases with loading and saving MDL files containing Korean and Chinese characters.
Enables incremental loading and saving. Simulink optimizes performance and memory usage by loading only required parts of the model and saving only modified parts of the model.
You can specify your file format for saving new models and libraries with the Simulink preference File format for new models and libraries.
If you upgrade an MDL file to SLX file format, the file contains
the same information as the MDL file, and you always have a backup
file. All functionality and APIs that currently exist for working
with models, such as the
are also available when using the SLX file format. If you upgrade
an MDL file to SLX file format without changing the model name or
location, then Simulink creates a backup file by renaming the
MDL (if writable).
If you save an existing MDL file by clicking Save on the Simulation tab, Simulink respects the file’s current format and saves your model in MDL format.
To save an existing MDL file in the SLX file format:
On the Simulation tab, select Save > Save As.
Leave the default Save as type as SLX, and click Save.
Simulink saves your model in SLX format, and creates a
backup file by renaming the MDL (if writable) to
save_system mymodel mymodel.slx
mymodel.slx, and if the existing file
mymodel.mdlis writable it is renamed
SLX files take precedence over MDL files, so if both exist with the same name and you do not specify a file extension, you load the SLX file.
Simulink Projects can help you migrate files to SLX. For an example, see Convert from MDL to SLX in a Project and Preserve Revision History.
If you use third-party source control tools, be sure to register
the model file extension
.slx as a binary file
format. If you do not, these third-party tools might corrupt SLX files
when you submit them.
|Operations with Possible Compatibility Considerations when using SLX||What Happens||Action|
|Hard-coded references to file names with extension ||Scripts cannot find or process models saved with new file extension ||Make your code work with both the |
Use functions like
|Third-party source control tools that assume a text format by default.||Binary format of SLX files can cause third-party tools to corrupt the files when you submit them.||Register |
|Changing character encoding.||Some cases are improved, e.g., SLX solves some problems in previous releases with loading and saving MDL files containing Korean and Chinese characters. However, sharing models between different locales remains problematic.||See SLX Files and Character Encodings.|
When you save a model as an MDL file, the current Simulink character encoding encodes
the text stored in the model file. This behavior can lead to data corruption if the model
contains characters that are not representable in the current encoding. If this is the
case, the model is saved as
model is the model name, leaving the original model file
unchanged. Simulink also displays an error message that specifies the line and column number of
the first character that cannot be represented.
To fix this issue, either:
Saving Simulink models in the SLX format typically reduces file size and eliminates
character encoding issues because models are saved using
You might want to convert your MDL file to an SLX file if you:
Load and save models that have Korean or Chinese characters.
Might benefit from a compressed model file.
You can export (save) a model created with the latest version of the Simulink software in a format used by an earlier version. For example, to share a model with colleagues who only have access to a previous version of the Simulink product.
To export a model in an earlier format:
In the Simulink Editor, on the Simulation tab, click Save. This saves a copy in the latest version of Simulink. This step avoids compatibility problems.
In the Simulink Editor, on the Simulation tab, select Save > Previous Version.
In the Export to Previous Version dialog box, from the Save as type list, select the previous version to which to export the model. The list supports 7 years of previous releases.
When you export a model to a previous version’s format,
the model is saved in the earlier format, regardless of whether the
model contains blocks and features that were introduced after that
version. If the model does contain blocks or use features that postdate
the earlier version, the model might not give correct results when
you run it in the earlier version of Simulink software. In addition, Simulink converts
blocks that postdate an earlier version into yellow empty masked Subsystem blocks.
For example, if you use
save_system to export
a model to Release R2007b, and the model contains Polynomial blocks, Simulink converts
the Polynomial blocks into yellow empty masked Subsystem blocks. Simulink also
removes any unsupported functionality from the model. See
You can open a model created in an earlier version of Simulink and export that model to a different earlier version. To prevent compatibility problems, use the following procedure if you need to save a model from one earlier version to another earlier version.
Use the current version of Simulink to open the model created with the earlier version.
Before you make any changes, save the model in the current version by clicking Save on the Simulation tab.
After saving the model in the current version, you can change and resave it as needed.
Save the model in the earlier version of Simulink. On the Simulation tab, select Save > Previous Version.
Start the earlier Simulink version and use it to open the model that you exported to that earlier version.
Save the model in the earlier version.
You can now use the model in the earlier version of Simulink exactly as you could if it had been created in that version.
See also the Simulink preferences that can help you work with models from earlier versions: