DocumentationHelp CenterDocumentation
Clear all outputs of shift register
reset(register)
example
reset(register) clears all the outputs of a serial-in/parallel-out (SIPO) shift register.
register
collapse all
Create an Arduino® object with the 'ShiftRegister' library.
'ShiftRegister'
a = arduino('COM4','Uno','Libraries','ShiftRegister');
Connect to a 74HC164 shift register connected to your Arduino board, and specify resetPin.
74HC164
resetPin
register = shiftRegister(a,'74HC164','D2','D3','D4')
register = shiftRegister with properties: Model: '74HC164' DataPin: 'D2' ClockPin: 'D3' ResetPin: 'D4'
Clear all outputs.
reset(register);
Shift register connection, specified as a shiftRegister object.
Note
Specify the resetPin while creating the shift register object to use the reset function.
arduino | read | shiftRegister | write
arduino
read
shiftRegister
write
Tiene una versión modificada de este ejemplo. ¿Desea abrir este ejemplo con sus modificaciones?
Ha hecho clic en un enlace que corresponde a este comando de MATLAB:
Ejecute el comando introduciéndolo en la ventana de comandos de MATLAB. Los navegadores web no admiten comandos de MATLAB.
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Contact your local office