BeagleBone Black ADC
The BeagleBone Black hardware has six analog input pins (
AIN5). Each analog input pin has a 12-bit analog-to-digital
converter (ADC) that converts the analog input voltage to a digital voltage
In addition to the six input pins, the BeagleBone Black hardware has power rail and
ground pins (
readVoltage measures the voltage applied to an analog
input pin relative to the ADC ground pin (
GND_ADC). The ADC-driver
built into the Linux® kernel returns the voltage measurement converted to a double. The values
0 V (
Never connect a voltage greater than
1.8 Vacross the ADC pins. Voltages greater than
1.8 Vcan damage the board.
Always connect the negative (ground) side of a voltage source to
GND_ADC. The ADC measures positive voltages only. A reversed connection can damage the board.