setPILPort

Set the TCP/IP port number used by the PIL execution

Syntax

setPILPort(hwObj,portNumber)

Description

setPILPort(hwObj,portNumber) sets the TCP/IP port number of the NVIDIA^® target board to be used by the processor-in-the-loop (PIL) execution. This value is valid until the hardware object is live.

Examples

Configure the Port Number Used by PIL on a Jetson TX2 Board

You can configure the port number to be used by PIL on an NVIDIA Jetson hardware from the MATLAB^® environment using the setPILPort method of the jetson hardware connection object.

To create a live hardware connection object, provide the host name or IP address, user name, and password of the target board.

hwObj = jetson('192.168.1.15','ubuntu','ubuntu');
setPILPort(hwObj,17726);

Input Arguments

hwObj — Connection to a specific NVIDIA hardware board

jetson object | drive object

Connection to a specific NVIDIA hardware board, specified as a jetson or drive object.

Use the jetson or the drive function to create this connection.

portNumber — Port number

positive integer

Specify a valid TCP/IP port number on the NVIDIA board to be used by PIL execution.

Example: 17725