Set GPIO pin status
Simulink Support Package for Raspberry Pi Hardware / Basic
Use the GPIO Write block to set the logical value of a digital pin of your Raspberry Pi™ board.
You can damage your target hardware by:
Exceeding the maximum voltage that can be applied to GPIO pins.
Shorting a GPIO pin to ground.
Shorting a GPIO pin with high voltage to another GPIO pin with low voltage.
Connecting a GPIO pin to a voltage source greater than the maximum voltage.
Exceeding the maximum current by driving multiple GPIO pins high simultaneously.
Port_1 — Set GPIO pin status
The block accepts a logical value to set the status of a digital pin.
Board — Raspberry Pi hardware board
Model B+ (default) |
Model B Rev1 |
Model B Rev2 |
Pi 2 Model B |
Pi 3 Model B |
Pi 3 Model B+ |
Pi Zero W |
Pi 4 Model B
Select your Raspberry Pi hardware board. You can find this information on the target hardware, product packaging, or product documentation.
GPIO number — GPIO pin of Raspberry Pi hardware board
4 (default) |
Select a GPIO pin of the Raspberry Pi hardware board to set its logical status. Do not use the same GPIO pin in multiple blocks within the Simulink® model. For more information on Raspberry Pi GPIO pins, click View pin map.