Get IP Address of Raspberry Pi Hardware
You can use any of these methods to know the IP address of your Raspberry Pi™ hardware.
Connect speakers or headphones to the audio jack of Raspberry Pi and reboot it. After rebooting, a synthesized voice on your Raspberry Pi board reads out the IP address.
Connect your Raspberry Pi board with a keyboard, monitor, and mouse. Then, log in to the Linux® terminal. Enter this command.
The IP configuration settings for the
eth0Ethernet connector is displayed on the terminal.
If, during the firmware update process, you configured your Raspberry Pi board to use a local area network (LAN) or home network, use SSH to connect to the host name of the board. For example, if the host name is
raspberrypi-AH-RDLUGYHE, enter the following in a MATLAB® Command Window:After logging in, use
h = raspberrypi('raspberrypi-AH-RDLUGYHE') h.openShell()
ifconfigto get the IP address of the board.
You can use the host name to connect to your board only if you have a domain name system (DNS) within your network.