Get radio hardware information
information about the radio hardware specified by
dev. The information includes
the radio hardware name and version.
Before calling the
make sure the SD card configured during hardware setup is
inserted into the reader of the radio hardware. You can also
configure an SD card by using the
Get Radio Hardware Information
Make sure your radio hardware is configured for host-radio communication by following the steps in Guided Host-Radio Hardware Setup.
Create a radio object for your radio hardware.
dev = sdrdev('E3xx')
dev = SDRDevE3xx with properties: IPAddress: '192.168.3.2' DeviceName: 'E3xx'
Use this object to get radio hardware information.
## Establishing connection to hardware. This process can take several seconds.
ans = struct with fields: Status: 'Full information' libiio: 'Host version: 0.17.g5bdc242' HDL: 'PCORE Version: 10.0b' Bitstream: ''E310' default bitstream, Path: /mnt/system.bit, MD5: 81b57fc26edebc24c0c6a863c75b1e73'
Introduced in R2016b