Main Content

Derive and Apply Inverse Kinematics to Two-Link Robot Arm

This example shows how to derive and apply inverse kinematics to a two-link robot arm by using MATLAB® and Symbolic Math Toolbox™.

The example defines the joint parameters and end-effector locations symbolically, calculates and visualizes the forward and inverse kinematics solutions, and finds the system Jacobian, which is useful for simulating the motion of the robot arm.

Step 1: Define Geometric Parameters

Define the link lengths, joint angles and end-effector locations of the robots as symbolic variables.

syms L_1 L_2 theta_1 theta_2 XE YE

Specify values for the link lengths of the robot.

L1 = 1;
L2 = 0.5;

Step 2: Define X and Y Coordinates of End Effector

Define the X and Y coordinates of the end-effector as a function of the joint angles (θ1,θ2).

XE_RHS = L_1*cos(theta_1) + L_2*cos(theta_1+theta_2)
XE_RHS = L2cos(θ1+θ2)+L1cos(θ1)
YE_RHS = L_1*sin(theta_1) + L_2*sin(theta_1+theta_2)
YE_RHS = L2sin(θ1+θ2)+L1sin(θ1)

Convert the symbolic expressions into MATLAB functions.

XE_MLF = matlabFunction(XE_RHS,'Vars',[L_1 L_2 theta_1 theta_2]);
YE_MLF = matlabFunction(YE_RHS,'Vars',[L_1 L_2 theta_1 theta_2]);

Step 3: Calculate and Visualize Forward Kinematics

Forward kinematics transforms the joint angles into end-effector locations: (θ1,θ2)f(θ1,θ2)(XE,YE). Given specific joint-angle values, use forward kinematics to calculate the end-effector locations.

Specify the input values of the joint angles as 0<θ1<90 and -180<θ2<180.

t1_degs_row = linspace(0,90,100);
t2_degs_row = linspace(-180,180,100);
[tt1_degs,tt2_degs] = meshgrid(t1_degs_row,t2_degs_row);

Convert the angle units from degrees to radians.

tt1_rads = deg2rad(tt1_degs);
tt2_rads = deg2rad(tt2_degs);

Calculate the X and Y coordinates using the MATLAB functions XE_MLF and YE_MLF, respectively.

X_mat = XE_MLF(L1,L2,tt1_rads,tt2_rads);
Y_mat = YE_MLF(L1,L2,tt1_rads,tt2_rads);

Visualize the X and Y coordinates using the helper function plot_XY_given_theta_2dof.


Step 4: Find Inverse Kinematics

Inverse kinematics transforms the end-effector locations into joint angles: (XE,YE)g(XE,YE)(θ1,θ2). Find the inverse kinematics from the forward kinematics equations.

Define the forward kinematics equations.


Solve for θ1 and θ2.

S = solve([XE_EQ YE_EQ], [theta_1 theta_2])
S = struct with fields:
    theta_1: [2x1 sym]
    theta_2: [2x1 sym]

The structure S represents the multiple solutions for θ1 and θ2. Show the pair of solutions for θ1.

ans = 

(2atan(2L1YE+σ1L12+2L1XE-L22+XE2+YE2)2atan(2L1YE-σ1L12+2L1XE-L22+XE2+YE2))where  σ1=-L14+2L12L22+2L12XE2+2L12YE2-L24+2L22XE2+2L22YE2-XE4-2XE2YE2-YE4

Show the pair of solutions for θ2.

ans = 

(-σ1σ1)where  σ1=2atan(-L12+2L1L2-L22+XE2+YE2L12+2L1L2+L22-XE2-YE2-L12+2L1L2-L22+XE2+YE2)

Convert the solutions into MATLAB functions that you can use later. The functions TH1_MLF and TH2_MLF represent the inverse kinematics.

TH1_MLF{1} = matlabFunction(S.theta_1(1),'Vars',[L_1 L_2 XE YE]);
TH1_MLF{2} = matlabFunction(S.theta_1(2),'Vars',[L_1 L_2 XE YE]);
TH2_MLF{1} = matlabFunction(S.theta_2(1),'Vars',[L_1 L_2 XE YE]);
TH2_MLF{2} = matlabFunction(S.theta_2(2),'Vars',[L_1 L_2 XE YE]);

Step 5: Calculate and Visualize Inverse Kinematics

Use the inverse kinematics to compute θ1 and θ2 from the X and Y coordinates.

Define the grid points of the X and Y coordinates.

[xmat,ymat] = meshgrid(0:0.01:1.5,0:0.01:1.5);

Calculate the angles θ1 and θ2 using the MATLAB functions TH1_MLF{1} and TH2_MLF{1}, respectively.

tmp_th1_mat = TH1_MLF{1}(L1,L2,xmat,ymat);
tmp_th2_mat = TH2_MLF{1}(L1,L2,xmat,ymat);

Convert the angle units from radians to degrees.

tmp_th1_mat = rad2deg(tmp_th1_mat);
tmp_th2_mat = rad2deg(tmp_th2_mat);

Some of the input coordinates, such as (X,Y) = (1.5,1.5), are beyond the reachable workspace of the end effector. The inverse kinematics solutions can generate some imaginary theta values that require correction. Correct the imaginary theta values.

th1_mat = NaN(size(tmp_th1_mat));
th2_mat = NaN(size(tmp_th2_mat));

tf_mat = imag(tmp_th1_mat) == 0;
th1_mat(tf_mat) = real(tmp_th1_mat(tf_mat));

tf_mat = imag(tmp_th2_mat) == 0;
th2_mat(tf_mat) = real(tmp_th2_mat(tf_mat));

Visualize the angles θ1 and θ2 using the helper function plot_theta_given_XY_2dof.


Step 6: Compute System Jacobian

The definition of the system Jacobian is:


the_J = jacobian([XE_RHS YE_RHS],[theta_1 theta_2])
the_J = 


You can relate the joint velocity to the end-effector velocity and the other way around, by using the system Jacobian J and its Moore-Penrose pseudoinverse J+:




You can also convert the symbolic expression of the Jacobian to a MATLAB function block. Simulate the end-effector locations of the robot on a trajectory by defining the multiple waypoints as inputs to a Simulink® model. The Simulink model can calculate a motion-profile based on the joint angle values to reach each waypoint in the trajectory. For more details, see Inverse Kinematics of a 2-link Robot Arm and Teaching Rigid Body Dynamics.

Helper Functions

function plot_theta_given_XY_2dof(X_mat,Y_mat,theta_1_mat_degs,...

xlab_str = 'X (m)';
ylab_str = 'Y (m)';

hax(1) = subplot(1,2,1);
   contourf(X_mat, Y_mat, theta_1_mat_degs);
      clim(hax(1), [-180 180]);
      colormap(gca,'jet'); colorbar
      xlabel(xlab_str, 'Interpreter', 'tex');
      ylabel(ylab_str, 'Interpreter', 'tex');
      title(hax(1), '\theta_1', 'Interpreter', 'tex')
hax(2) = subplot(1,2,2);
   contourf(X_mat, Y_mat, theta_2_mat_degs);
      clim(hax(2), [-180 180]);
      colormap(gca,'jet'); colorbar
      xlabel(xlab_str, 'Interpreter', 'tex');
      ylabel(ylab_str, 'Interpreter', 'tex');
      title(hax(2), '\theta_2', 'Interpreter', 'tex')


function plot_XY_given_theta_2dof(theta_1_mat_degs,theta_2_mat_degs,...
xlab_str = '\theta_1 (degs)';
ylab_str = '\theta_2 (degs)';

hax(1) = subplot(1,2,1);
   contourf(theta_1_mat_degs, theta_2_mat_degs, X_mat);
      clim(hax(1), [0 a_cmax]);
      colormap(gca,'jet'); colorbar
      xlabel(xlab_str, 'Interpreter', 'tex');
      ylabel(ylab_str, 'Interpreter', 'tex');
      title(hax(1), 'X_E', 'Interpreter', 'tex')
hax(2) = subplot(1,2,2);
   contourf(theta_1_mat_degs, theta_2_mat_degs, Y_mat); 
      clim(hax(1), [0 a_cmax]);
      colormap(gca,'jet'); colorbar
      xlabel(xlab_str, 'Interpreter', 'tex');
      ylabel(ylab_str, 'Interpreter', 'tex');
      title(hax(2), 'Y_E', 'Interpreter', 'tex')


See Also