First solve for initial conditions failed to converge in Simscape model
46 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
I have the following model of the recovery of refrigerant (R134A from REFPROP) from a heat exchanger to a recovery cylinder, respectively heated by a resistance and cooled by ice to induce the pressure difference. However, with the initial conditions that I set for the pressure in the heat exchanger and cylinder I get the following warning and it solves for other initial conditions:
First solve for initial conditions failed to converge. Trying again with all high priorities relaxed to low.
Unable to satisfy all initial conditions. The variables involved are listed below. The following variables are involved in a constraint that conflicts with their targets: 'Heat_Exchanger.p_I' (Pressure of fluid volume) 'Recovery_Cylinder.p_I' (Pressure of fluid volume) Here are the equations involved: all components involved'simulation/Heat Exchanger'Equation location is: 'C:\Program Files\MATLAB\R2019b\toolbox\physmod\simscape\library\m\+foundation\+two_phase_fluid\+elements\constant_volume_chamber.ssc' (line 153) 'simulation/Recovery Cylinder'Equation location is: 'C:\Program Files\MATLAB\R2019b\toolbox\physmod\simscape\library\m\+foundation\+two_phase_fluid\+elements\constant_volume_chamber.ssc' (line 153)
Could someone help me and please tell what is going wrong?
3 comentarios
Yifeng Tang
el 17 de Ag. de 2020
I suspect this may have to with the two "A" ports connected directly to each other, meaning there is no volume or flow resistance between them, and they have to share the same pressure, enthalpy, etc. Try adding a pipe or orifice in between and see whether things improve.
Respuestas (1)
Yifeng Tang
el 28 de Jun. de 2021
I suspect this may have to with the two "A" ports connected directly to each other, meaning there is no volume or flow resistance between them, and they have to share the same pressure, enthalpy, etc. Try adding a pipe or orifice in between and see whether things improve.
0 comentarios
Ver también
Categorías
Más información sobre Sources en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!