Rack and Pinion Assembly Testrig

This example models a gear and a toothed bar (rack). The necessary blocks for the rack and pinion assembly are contained in a masked subsystem with the key parameters exposed in a dialog box.

Contents

Model

Rack and Pinion Assembly Subsystem

Open Subsystem

Rack and Pinion Assembly Constraints Subsystem

The Rack and Pinion Constraint requires that the rest of the mechanism hold the two frames to which it is connected in alignment. This subsystem has the necessary constraints and parameterized Rigid Transform to hold the frames in the right position and orientation.

Open Subsystem

Simulation Results from Simscape Logging

The plot below shows the speeds of the rack and pinion.