Community Profile

photo

Julia Antoniou

Last seen: Today Con actividad desde 2017

Estadísticas

  • Knowledgeable Level 3
  • Revival Level 1
  • Knowledgeable Level 2
  • First Answer

Ver insignias

Content Feed

Ver por

Respondida
fatal error: rtiostream_utils.h: No such file or directory
Hi Fumi, I was running into the same error when trying to deploy my model to hardware after previously running it successfull...

alrededor de 6 años hace | 22

| aceptada

Respondida
command line install of .mlpkginstall
Hi Gareth, To quickly install the same support package on many computers that have the same version of MATLAB, try installing...

alrededor de 6 años hace | 0

Respondida
How to convert a cell vector with numbers and non-numbers into a comma-seprated (.csv) format?
Hi Adriano, You could accomplish this with the following commands: T = cell2table(Matrix); writetable(T,'filename.csv...

alrededor de 6 años hace | 0

| aceptada

Respondida
Can I use matlab in different computers with the same license?
Hi Jorge, With a student license, you can have MATLAB installed and activated on two different computers. But, you can only b...

alrededor de 6 años hace | 7

| aceptada

Respondida
How can I convert a string matrix into a table?
Hi Edoardo, I believe you could accomplish the output you are describing with the following commands (with "matrix" being you...

alrededor de 6 años hace | 1

Respondida
Can equations of motion generated in MATLAB Simscape Multibody be extracted
You are correct - as of the latest release (MATLAB R2017b), this functionality is not possible with Simscape Multibody.

alrededor de 6 años hace | 0

| aceptada

Respondida
How can I add more tabs to the block dialog box of a simscape component?
Hi Argiñe, It is not possible to make these kinds of changes to the dialogs of blocks from standard Simulink libraries unless...

alrededor de 6 años hace | 0

Respondida
Connections in Simulink (no arrows but squares)?
Hi Maria, Your subsystem block (with the labels "out1" and "v1") cannot be connected to the induction motor block because the...

alrededor de 6 años hace | 0

| aceptada

Respondida
How to connect ev3 lego robot to robotics operating system to perform path following
Hi Santosh, To connect with a LEGO EV3 robot, I would recommend using our MATLAB and Simulink Hardware Support Packages. The ...

alrededor de 6 años hace | 0

Respondida
How to draw Simulink blocks with arbitrary connections?
Hi Bardo, In this case, it would be helpful to know more about your specific workflow and if this is a question of simulation...

alrededor de 6 años hace | 0

Respondida
Replace Signal in Signal Builder from csv-file
Hi Tobias, If your signal builder block contains data from an existing CSV file, you can replace it with data from a new CSV ...

alrededor de 6 años hace | 0

| aceptada

Respondida
Improving the speed of my model
Hi Tony, I am not sure if you are referring to the block replacement suggestion, or the "failed" message. If you are refe...

alrededor de 6 años hace | 1

| aceptada

Respondida
Recontruct temporal signal from FFT after transformations
Hi Benoit, There is no windowed-averaged or moving average function specific to FFT. I would recommend using the "movmean" fu...

más de 6 años hace | 0

Respondida
How do I reach audioTestBench -> audioFileReader.SamplesPerFrame for use in my plugin?
Hi Kim, There is no programmatic interface to the Audio Test Bench UI. However, you could obtain the SamplesPerFrame property...

más de 6 años hace | 0

| aceptada

Respondida
Plot lat longs on a Map from Simulink during rum time
I would recommend creating your plot using written MATLAB code in a MATLAB Function block. This way, you can create and update y...

más de 6 años hace | 0

Respondida
How to set input and output data types separately for a filter when using generatehdl()?
Hi Johannes, On the "generatehdl" documentation page, there is a long list of Name-Value pair arguments under the Input Argum...

más de 6 años hace | 1

Respondida
How can we couple MATLAB and Aspen Exchanger Design and Rating?
I would recommend using Simulink to couple AspenTech with MATLAB. The interface is commercially available in the AspenTech produ...

más de 6 años hace | 0

Respondida
How can I change the data access of a storage class Get/Set?
This is possible if you are able to change the type of your "GetSet" custom storage class (on the "General" tab of the CSCDesign...

más de 6 años hace | 0

Respondida
How do I have a Multicast tag in an Entity Multicast block that reads from a vector whose elements change over time rather than a fixed string?
I do not believe the "Entity Multicast" block can communicate with more than one "Multicast Receive Queue" block if those receiv...

más de 6 años hace | 0

Respondida
How do I create an entity server with preemption that has a capacity greater than 1?
The "Entity Server" block cannot have a capacity greater than 1 if the block also permits preemption. Navigate to the "Preemptio...

más de 6 años hace | 0

Respondida
How can I measure the angular velocity in a belt pulley?
Hi Emidio, This error happens when the solver is unable to solve the system's differential equations. I believe you can resol...

más de 6 años hace | 0

| aceptada

Respondida
Unit testing Stateflow charts
Hi Garret, There is a tutorial in our documentation that explains how to generate reusable code from an atomic stateflow char...

más de 6 años hace | 0

Respondida
What blocks are supported for changing parameters with parsim command?
Hi Antonio, I would recommend using the example on the documentation page for the "parsim" function, linked below. https://w...

más de 6 años hace | 2

| aceptada

Respondida
Integrate function in an interval of time into simulink function block
Hi Matteo, The error you receive when using the "integral" function in your MATLAB function block is due to the fact that the...

más de 6 años hace | 0

| aceptada

Respondida
Build problems due to TflCheckSum difference
Hi Stefan, To resolve this error, I would first recommend deleting any "SLPRJ" folders the compiling may have created, and th...

más de 6 años hace | 0

Respondida
Custom Library containing SimPowerSystems switches?
Hi Abhijit, It seems that the IGBT block in question cannot be placed on its own in a model because it needs other Simscape Pow...

más de 6 años hace | 0

Respondida
Build S function block
Hi Kidus, Generating code for a model that has an S-function does require you to provide a TLC file. When a model is built, i...

más de 6 años hace | 0

| aceptada

Respondida
How to connect a Simsacpe multibody to simulink control system?
Hi Karem, Based on my understanding of your question, you have a Simscape model you would like to incorporate into a control ...

más de 6 años hace | 0

Respondida
What's the meaning of ''uncalibrated camera'' and ''calibrated camera''
Hi Xiaolong, When you calibrate a camera, you are estimating parameters like the ones you mentioned in your question. These p...

más de 6 años hace | 1