Respondida
'parpool' fails in deployed application
See the MATLAB Answers post below - it could also just be a problem of running the executable against an incorrect version of MA...

más de 1 año hace | 0

Respondida
Usage of Matlab 2017b: Import filename of Simulink-Model into generated HDL-file (usage of HDL-coder)
In MATLAB R2017b, it is not possible to use macro-style keywords for custom header/footer comments with HDL Coder. We apologize...

más de 1 año hace | 0

Respondida
No driver block was generated for port(s) mapped to interface "LEDs General Purpose" in the software interface model. error occurred
Hi Praveen, The message that you mention should merely be a note (not an error) that no driver blocks are generated for the sof...

más de 1 año hace | 0

Respondida
Can I download older versions of MCR?
Please also see: How do I install older update versions of MATLAB Compiler Runtime (MCR)? Can I obtain versions of MCR that ar...

casi 2 años hace | 0

Respondida
Problem with the Connecttion between Zybo Z7 20 and Matlab
The MathWorks Zynq Workflow does not support ZYBO Z7-20 out of the box. The Linux image that you downloaded at the time was desi...

casi 2 años hace | 0

Respondida
Blackbox Interface : Task "Build FPGA Bitstream" unsuccessful
To avoid this error message, try to specify the external source code as "Additional source files" in HDL Workflow Advisor. When ...

alrededor de 2 años hace | 1

Respondida
Simulink Real-Time Build Error: Undefined identifier xPCLoadParamSetFile in xpcoptions.tlc
From what we know, this is an error that only appears after installing Speedgoat I/O Blockset. To prove this, run the following ...

alrededor de 2 años hace | 0

Respondida
Error in importhdl how to solve?
Here is a list of supported constructs with importdhl: https://www.mathworks.com/help/hdlcoder/ug/supported-verilog-constructs-...

alrededor de 2 años hace | 0

| aceptada

Respondida
Problem with Windows Management Instrumentation while compiling a DSpace program with a FPGA card (RTI Build Error)
The issue appears to with either Xilinx System Generator or dSPACE RTI. These tools are external to MathWorks. You may want to ...

alrededor de 2 años hace | 0

Respondida
Efficiently update MATLAB App Designer GUI real time from Simulink
See also the following MATLAB Answers post for more up-to-date info: https://www.mathworks.com/matlabcentral/answers/517628-how...

más de 2 años hace | 0

Respondida
Simulink engine interface is not enabled.
This is probably due to a licensing problem. Please see the following answer: https://www.mathworks.com/matlabcentral/answers/1...

más de 2 años hace | 0

Respondida
Simulink Engine Interface is not enabled
I suspect that this might be a licensing problem. For example, it could be that a network license key is unavailable. See also: ...

más de 2 años hace | 0

| aceptada

Respondida
Index exceeds array bounds when trying to configure USRP Support Package
We assume that you are receiving this error message while trying to set up the USRP Radio using the Hardware Setup GUI. The erro...

más de 2 años hace | 0

Respondida
How to run a code only up to a certain line?
Starting in R2021b, with our improved editor, there is also a new "Run to here" feature to run the code until to a certain line ...

más de 2 años hace | 0

Respondida
Simulink Real-Time API for Microsoft .NET Framework @ 2020b
See also the following MATLAB Answers post: https://www.mathworks.com/matlabcentral/answers/1459179-can-i-use-xpcapi-dll-or-xpc...

más de 2 años hace | 0

Respondida
SoC Builder: 'loading existing binaries' workflow fails with error: "Selected folder does not contain project information files"
Even if you would like to use the pregenerated bitstream, you need to follow all the steps in the example. This means that you h...

más de 2 años hace | 0

Respondida
EtherCAT master in Simulink Desktop Real-Time
The short answer is no. Simulink Real-Time (SLRT) and Simulink Desktop Real-Time (SLDRT) are fundamentally different products an...

más de 2 años hace | 0

Respondida
Why do I get the error "Unable to check out the Simulink Coder license which is required to generate code"?
See the following answer to troubleshoot license and installation issues with our Coder products: https://www.mathworks.com/mat...

más de 2 años hace | 0

Respondida
Setup : FPGA in LOOP
The Xilinx tool edition that you need to install will most likely depend on the FPGA that you would like to use. See also: http...

más de 2 años hace | 0

Respondida
What is the roadmap to updating MATLAB to use HDF5 1.10 or later?
We support HDF5 1.10.7 starting from release 2021b. See the release notes: https://www.mathworks.com/help/releases/R2021b/matla...

más de 2 años hace | 0

| aceptada

Respondida
Does the 2020a version allow using the deploy function for deep learning models on macOS?
According to this documentation page, we don't support deployment of deep learning applications from Mac to Raspi as of R2021b: ...

más de 2 años hace | 0

Respondida
How to deploy a matlab function to raspberry pi 3b+
According to this documentation page, we don't currently support deployment of deep learning networks from Mac to Raspi: https:...

más de 2 años hace | 0

Respondida
In 2018b MATLAB version, Can SIMULINK files (.slx) be converted into Standalone applications(.exe)?
Please see the following answer. The recommended workflow is to upgrade MATLAB to R2020a or later and use Simulink Compiler: ht...

más de 2 años hace | 0

Respondida
Using Raspberry Pi as Hardware for Vehicle Network Toolbox
Starting from R2021b, you can use the MATLAB Support Package for Raspberry Pi Hardware to read and write CAN messages from the C...

más de 2 años hace | 0

Respondida
Standalone executable of Simulink Desktop Real Time model
No, it is currently not possible to run a Simulink Desktop Real-Time simulation as standalone executable. Depending on the hard...

más de 2 años hace | 0

Respondida
About the difference between Normal Mode and External Mode of Simulink Desktop Real-Time.
Please see the following post: https://www.mathworks.com/matlabcentral/answers/536647-what-are-the-differences-between-normal-a...

más de 2 años hace | 0

Respondida
Memory section default configuration
You see this warning because starting from R2018a, the correct way to define default memory sections is using the Code Mappings ...

más de 2 años hace | 0

Respondida
What is the difference between MATLAB Web App Server (R2020a new toolbox) and MATLAB Web App Server (in matlab compiler)?
You can also see the following doc page for more details regarding the differences: https://www.mathworks.com/help/compiler/web...

casi 3 años hace | 0

Respondida
Worst Case execution time analysis for Simulink Blocks
Worst Case Execution Time is not yet a feature provided by MathWorks products. However, our development team is aware of this us...

casi 3 años hace | 0

Respondida
using forecast in combination with nlarx gives an error
The error message is caused by the variable "forecast=6" in your code that shadows the "forecast" function. Please rename the va...

casi 3 años hace | 0

| aceptada

Cargar más