Respondida
How to acces a simscape.logging.Node
I don"t have the toolbox but this should work. plot(simlog.Motor_And_Load.PMSM.Permanent_Magnet_Synchronous_Motor.angular_v...

5 meses hace | 0

Respondida
loop not recording array
Note: Handcoded from memory. Loops are unnecessary in this case. differences = diff(raininches); avgdiff = mean(...

5 meses hace | 0

Respondida
Generate c function from simulink subsystem
Make the subsytem that you want to create C code as "Atomic Subsystem". If you have an atomic subsystem in Simulink and you w...

5 meses hace | 0

Respondida
how to assign values of one editfield to another editfield in masking a simulink subsystem
1. Open the Mask Editor (ctrl + M). Add the parameters in *Parameters & Dialog* Section as *edit field* types give the names for...

5 meses hace | 0

Respondida
Opaque bus creator, do not permit to change options
Press ctrl+d (compile model) and select the appropriate signal to propagate.

5 meses hace | 0

Respondida
Invalid block diagram name supplied
The block name has to be a valid MATLAB name. Make sure it follow the naming conventions.

5 meses hace | 0

Respondida
How can I change SlopeAdjustmentFactor ?
You need to use Datatype Conversion block and set the Output data type to fixdt(0, 16, 1) [where 1 is the SlopeAdjustmentFactor]...

5 meses hace | 0

| aceptada

Respondida
Why is my pv array in simulink not the update blue version?
Background is supposed to be white in color as per documentation <https://www.mathworks.com/help/sps/powersys/ref/pvarray.html *...

5 meses hace | 0

Respondida
How to find the value of variable in the library?
Click on the subsystem and press ctrl + M and go to initialization. And make sure to check out all the callbacks of the subsy...

5 meses hace | 0

Respondida
measuring the time between two point of signal
<</matlabcentral/answers/uploaded_files/1556087/IMG_4187.jpg>> <</matlabcentral/answers/uploaded_files/1556092/IMG_4186.JPG>>...

5 meses hace | 0

| aceptada

Respondida
Unlock and edit Simulink toolboxes
Like your last option is the safest. I don't have the Aerospace Toolbox but if you are able to see the contents of the subsytem....

5 meses hace | 0

Respondida
Simulink - How to exctract the exact time the derivative is different from 0?
Although it might be not what you are looking for. It definitely should help you get further. <</matlabcentral/answers/upload...

5 meses hace | 0

Respondida
How to get Signal names directly using out.simout block in simulink?
I would rather suggest you to log the labeled signals and visualise it in *Simulink Data Inspector* which can later be exported ...

5 meses hace | 0

Respondida
Simulink - How to extract the time when the signal is on?
So if your goal is to output a signal when the yellow signal is off. You could simply use a not logical operator <https://de....

5 meses hace | 0

Respondida
How can I find the determinant and transpose of a 13*13 matrix without writing all the numbers one by one?
doc det doc transpose

5 meses hace | 0

Respondida
Simulink to workspace doesn't work
Double click To workspace block. Select the "Save Format" as Array. By the way, the one you have is timeseries. You can si...

5 meses hace | 0

| aceptada

Respondida
I have license expire problem
Like it says, contact MathWorks Support Team or your system administrator

5 meses hace | 1

| aceptada

Respondida
The name of these symbols in Simulink
Green -> Step block Yellow -> Gain block Red -> To Workspace block Blue -> Terminator block

5 meses hace | 0

Respondida
Attached one symbol . kindly help to find out the symbol name in simulink
Looks like there’s no any built in Simulink blocks as you show here. Perhaps contacting the author of the document is a good ide...

5 meses hace | 0

Respondida
How to debug effectively inside MATLAB function block in Simulink?
Debugging MATLAB Function Block is the same as you would normally debug MATLAB Code. Additional advantage is that you can watch ...

5 meses hace | 0

Respondida
Setting parameters in Signal Editor block in simulink
<https://www.mathworks.com/help/simulink/ug/import-custom-file-type.html>

5 meses hace | 0

| aceptada

Respondida
How can I show values of a library block parameters?
you can use MATLABFucntion block and use get_param(gcb, "Fully_charge_voltage") to get the value of the masked parameter. Assumi...

5 meses hace | 0

Respondida
Turning voltage on/off in a PV Array and DC motor simulation
Use <https://www.mathworks.com/help/sps/powersys/ref/igbt.html *IGBT*> instead of the block that you show in the picture. You ca...

5 meses hace | 0

Respondida
For iterator subsystem output cannot hold one sample time
The picture doesn't show the x axis ticks. The input signal values are not shown to us. It is important to note that the signal ...

5 meses hace | 0

Respondida
How to use a Simulink.Signal object to generate code?
Make sure that the signal resolves to Simulink Object. If it still causes problem , provide a screenshot of how the signal is be...

5 meses hace | 0

Respondida
How do I switch on and off my voltage source to charge batteryes based off of my current state of charge?
I don"T have Simscape License. But the logic can be implemented. Feed the SOC signal to the switch <https://www.mathworks.co...

5 meses hace | 0

| aceptada

Respondida
F28379d Communication Protocol Error
Seems like a similar issue from <https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcon...

5 meses hace | 0

Respondida
i want to develope DC to DC converter that contain diode, inductor, mosfet etc so can i develope these blocks using basic simulink library instead of simscape?
Yes, you can. See the link ( <https://www.mathworks.com/help/sps/power-converters.html *Power Converters*> ) for different types...

5 meses hace | 0

Respondida
I am trying to run the following example but encountered an error.
See the link to simulate the model in accelerator mode <https://www.mathworks.com/help/sldo/ug/accelerating-model-simulations-du...

5 meses hace | 0

Respondida
Export Symbols attributes in Stateflow
You can turn on the option to display the attributes by default and by doing this it’s always easier for others to understand wh...

5 meses hace | 1