Respondida
change the color of an input port from a callback function
yes, use set_param.
change the color of an input port from a callback function
yes, use set_param.
alrededor de 14 años hace | 0
| aceptada
Respondida
change the color of a block based on its output
It is possible using an event listener: http://www.mathworks.com/help/toolbox/simulink/slref/add_exec_event_listener.html
change the color of a block based on its output
It is possible using an event listener: http://www.mathworks.com/help/toolbox/simulink/slref/add_exec_event_listener.html
alrededor de 14 años hace | 1
| aceptada
Publicado
Sous-Vide Cooking with Simulink Part 1
This week I am sharing the first part of a story about what I do with Simulink during weekends! Introduction Last...
alrededor de 14 años hace
Respondida
MUX blocks and RTW code generation
Good question! The Mux block is virtual. The line coming out of the Mux block is just a visual representation. This is why yo...
MUX blocks and RTW code generation
Good question! The Mux block is virtual. The line coming out of the Mux block is just a visual representation. This is why yo...
alrededor de 14 años hace | 1
| aceptada
Resuelto
Select every other element of a vector
Write a function which returns every other element of the vector passed in. That is, it returns the all odd-numbered elements, s...
alrededor de 14 años hace
Respondida
Model of cycling: closed loop with automatic adjustment of knee and pedal angles
I am not sure I understand what you are looking for. It looks like you did a very good job at computing the knee and hip torq...
Model of cycling: closed loop with automatic adjustment of knee and pedal angles
I am not sure I understand what you are looking for. It looks like you did a very good job at computing the knee and hip torq...
alrededor de 14 años hace | 0
Respondida
custom built transfer function block in simulink
After you open the block dialog, click on the "Help" button... it should explain everything. You can find the same here: h...
custom built transfer function block in simulink
After you open the block dialog, click on the "Help" button... it should explain everything. You can find the same here: h...
alrededor de 14 años hace | 0
Respondida
SIMULINK Scope ylabel
I recommend another approach. Since you need that for a publication, you do not need the Simulink Scope to look like that du...
SIMULINK Scope ylabel
I recommend another approach. Since you need that for a publication, you do not need the Simulink Scope to look like that du...
alrededor de 14 años hace | 0
Publicado
Using Discrete Data as an input to your Simulink model
August 2019 Update: See blog post Loading Signals in Timetable Format for an improved way to address the issue described in...
alrededor de 14 años hace
Respondida
Multiprocessing in Simulink
If you want Simulink to take advantage of multiple processors, you can use the parallel computing toolbox. This will allow yo...
Multiprocessing in Simulink
If you want Simulink to take advantage of multiple processors, you can use the parallel computing toolbox. This will allow yo...
alrededor de 14 años hace | 2
Respondida
Conditionals and triggered subsystems in Simulink
Based on the description, Enabled subsystem sounds appropriate. The Enabled block allows you to hold or reset states when you en...
Conditionals and triggered subsystems in Simulink
Based on the description, Enabled subsystem sounds appropriate. The Enabled block allows you to hold or reset states when you en...
alrededor de 14 años hace | 1
Respondida
Error using 4-way valve
The block should provide a clear error message explaining that the pressure-flow characteristic should have at least 4 values in...
Error using 4-way valve
The block should provide a clear error message explaining that the pressure-flow characteristic should have at least 4 values in...
alrededor de 14 años hace | 0
Respondida
Error using 4-way valve
I am able to reproduce. This is definitely unexpected. Please contact technical support with your model to report this proble...
Error using 4-way valve
I am able to reproduce. This is definitely unexpected. Please contact technical support with your model to report this proble...
alrededor de 14 años hace | 0
Respondida
Outport used in Real-Time Multicore Systems
I am not sure what is the best way to log data in an model configured for concurrent execution. I would recommend contacting tec...
Outport used in Real-Time Multicore Systems
I am not sure what is the best way to log data in an model configured for concurrent execution. I would recommend contacting tec...
alrededor de 14 años hace | 0
Publicado
Applying Motion to SimMechanics Models
One of the features I like about SimMechanics is the ability to specify the motion of a system without having to think about...
alrededor de 14 años hace
Resuelto
Find all elements less than 0 or greater than 10 and replace them with NaN
Given an input vector x, find all elements of x less than 0 or greater than 10 and replace them with NaN. Example: Input ...
alrededor de 14 años hace
Resuelto
Make the vector [1 2 3 4 5 6 7 8 9 10]
In MATLAB, you create a vector by enclosing the elements in square brackets like so: x = [1 2 3 4] Commas are optional, s...
alrededor de 14 años hace
Resuelto
Times 2 - START HERE
Try out this test problem first. Given the variable x as your input, multiply it by two and put the result in y. Examples:...
alrededor de 14 años hace
Respondida
Problem with "initial conditions failed to converge" when connecting rotational to translational system
I looked at the model you linked, but the custom file is missing, like the parameter values. Adding stiffness and damping ma...
Problem with "initial conditions failed to converge" when connecting rotational to translational system
I looked at the model you linked, but the custom file is missing, like the parameter values. Adding stiffness and damping ma...
alrededor de 14 años hace | 0
Respondida
Integrate in embedded matlab function
If your EML block is continuous, I recommend outputting the "dx" signal, feed it to an Integrator block and connect the output o...
Integrate in embedded matlab function
If your EML block is continuous, I recommend outputting the "dx" signal, feed it to an Integrator block and connect the output o...
alrededor de 14 años hace | 0
Respondida
Difference between decimation and sample time
Decimation: The scope will show only 1 point every X time steps. Whatever the rate of the input signal, with a decimation of 5, ...
Difference between decimation and sample time
Decimation: The scope will show only 1 point every X time steps. Whatever the rate of the input signal, with a decimation of 5, ...
alrededor de 14 años hace | 1
| aceptada
Publicado
Advanced S-function Techniques: Scheduling Future Events
Today I will describe how to use a variable sample time s-function to schedule events in the future. This topic is fairly...
alrededor de 14 años hace
Respondida
Systems of Differential Equations
Seth published a good post on this topic: http://blogs.mathworks.com/seth/2008/05/23/how-to-draw-odes-in-simulink/
Systems of Differential Equations
Seth published a good post on this topic: http://blogs.mathworks.com/seth/2008/05/23/how-to-draw-odes-in-simulink/
alrededor de 14 años hace | 0
| aceptada
Respondida
Problem with "initial conditions failed to converge" when connecting rotational to translational system
Your code looks good. I think that the issue is that it often (depending on how it is connected) lead to index-2 DAE. The eq...
Problem with "initial conditions failed to converge" when connecting rotational to translational system
Your code looks good. I think that the issue is that it often (depending on how it is connected) lead to index-2 DAE. The eq...
alrededor de 14 años hace | 2
Respondida
Simulink Feedback Loop (Function-Call feedback Latch)
The "Function-Call feedback latch" option is available only if the Inport is inside a function call subsystem. If you want a del...
Simulink Feedback Loop (Function-Call feedback Latch)
The "Function-Call feedback latch" option is available only if the Inport is inside a function call subsystem. If you want a del...
alrededor de 14 años hace | 0
Respondida
Replacement for simset?
The main reason why the 'SrcWorkspace' is not documented anymore is because it is not compatible with the parallel toolbox. T...
Replacement for simset?
The main reason why the 'SrcWorkspace' is not documented anymore is because it is not compatible with the parallel toolbox. T...
alrededor de 14 años hace | 0
| aceptada
Respondida
Finding the velocity from displacement
I like to use a filtered derivative to do that. A transfer function in the form s/(tau*s+1)^2 with the right "tau" will give...
Finding the velocity from displacement
I like to use a filtered derivative to do that. A transfer function in the form s/(tau*s+1)^2 with the right "tau" will give...
alrededor de 14 años hace | 0
Respondida
How to include fluid inertia in a pipe that oscillates linearly in Simscape/SimHydraulic
With SimHydraulics, the Segmented Pipeline block should help. It simulates a hydraulic pipeline with resistive, fluid inerti...
How to include fluid inertia in a pipe that oscillates linearly in Simscape/SimHydraulic
With SimHydraulics, the Segmented Pipeline block should help. It simulates a hydraulic pipeline with resistive, fluid inerti...
alrededor de 14 años hace | 0
Publicado
Model-Based Design of a Dicycle
The other day I found this video: If you watch carefully, you will see around 1:50 that they used Simulink to design...
alrededor de 14 años hace
