Respondida
C5505 evm ecg interface in simulink
|Data Size| field refers to the number of values to read (of the type specified by |Data Type| field) from the Serial port at ev...

más de 13 años hace | 0

Respondida
CanTool shows zero for physical value
You can create a channel in MATLAB, start it to receive the messages on the network. % Create Channel - Virtual Channel 2 ...

más de 13 años hace | 0

| aceptada

Respondida
CanTool shows zero for physical value
Yes, your understanding is correct that the min/max values of 0 is causing the physical values of signals to be shown as 0. At t...

más de 13 años hace | 0

Respondida
Store a videoinput in a Data Store Memory block in Simulink
Hi Timo, Writing your own MATLAB function (using videoinput and getdata) and bringing into SIMULINK will not necessarily hel...

más de 13 años hace | 1

Respondida
Image acquisition in simulink (Framerate problem)
Hi Timo, Can you run the following code in MATLAB and check the frames rate (fps) value. This calculates the rate at which im...

más de 13 años hace | 1

Respondida
Image acquisition in simulink (Framerate problem)
Hi Timo, I do not know which model of ICube Camera you have but I had checked their product pages where they specify frame r...

más de 13 años hace | 1

Respondida
Problems with Data Aquisition Toolbox 2.17 and National Instruments cDAQ-9172
The Data Acquisition Toolbox Simulink Library does not support cDAQ devices yet. Only the MATLAB API supports CompactDAQ devices...

más de 13 años hace | 1

| aceptada