Respondida
How to write C code generation for ' not available function for standalone generation' ?
Do you need to change your filter over the simulation, if not, then the |coder.extrinsic| approach, as outlined in the error mes...

casi 9 años hace | 2

| aceptada

Respondida
Map array values relative to another array
Maybe something like this? b2 = reshape(interp1(a(:),b(:),a2(:),'linear','extrap'),size(a2)) HTH

casi 9 años hace | 0

| aceptada

Respondida
How to use a designed filter to convolve a signal.
You may want to use filtered_signal = filter(Hd,signal); |filter| and |conv| is essentially the same except that |filter...

casi 9 años hace | 1

| aceptada

Respondida
Matlab to read text fine line by line
Have you tried |fgetl|? <https://www.mathworks.com/help/matlab/ref/fgetl.html> HTH

casi 9 años hace | 0

Respondida
Can´t declare strings - Doublequotes are invalid characters
According to release notes, declaring string using double quotes is introduced in R2017a, so you will not be able to use it in R...

casi 9 años hace | 0

| aceptada

Respondida
create echo radar pulses
The following example may serve as a good starting point. You need Phased Array System Toolbox to run the example. <https://w...

casi 9 años hace | 0

Respondida
Phased Array Toolbox: Problem with Free space channel in implementing FSK radar. Phase shift depends only on carrier frequency and not on the base band signal
The FreeSpace channel assumes all signals are at the same frequency, or at least can be considered as in the same frequency. In ...

casi 9 años hace | 0

Respondida
Time delay Calculation using FFT-Based Algorithm
You are using |max(z)| in your delay computation. But that gives you the maximum correlation, yet what you want is the location ...

casi 9 años hace | 3

| aceptada

Respondida
Findpeaks outputs random values for distant targets!!
Haven't got chance to run your model. But what is the wrong value it reports when the target at 299m is not detected? Is it very...

casi 9 años hace | 0

| aceptada

Respondida
Process Data obtained from Staggered PRF
I'm not sure what you mean by simultaneously processing the data from two different PRFs, but what the example does is to proces...

casi 9 años hace | 0

Respondida
Time Delay of Arrival of two acoustic signals from an array using Phased Toolbox
The default frqeuency range for the hydrophone is between 0 and 200 kHz. However, in your example, the carrier is set at 300 kHz...

casi 9 años hace | 0

| aceptada

Respondida
How to create steering vector for MUSIC algorithm for Time of Arrival
I'm not sure if I follow your algorithm. Do you have a reference? The steering vector in some sense captures the system configur...

casi 9 años hace | 0

Respondida
How to plot array beampattern with Frost beamformer weights?
You can consider translating the weights to frequency domain to obtain the appropriate frequency response. Then you can compute ...

casi 9 años hace | 0

| aceptada

Respondida
Filterdesign of a given magnitude response
The following example might be helpful to you <https://www.mathworks.com/help/dsp/examples/arbitrary-magnitude-filter-design....

casi 9 años hace | 0

| aceptada

Respondida
I can use “phased.SumDifferenceMonopulseTracker”to create a MonoPulse tracker, but how to plot the Sum or Difference beam?
The SumDifferenceMonopulseTracker only gives out the angle. It does not provide sum and difference result at this point. One way...

casi 9 años hace | 0

| aceptada

Respondida
Using the 'Radar Waveform Analyzer' in phased array toolbox how do I specify my own phased-coded pulse?
The Radar Waveform Analyzer does not take custom waveform at this point. However, all the analysis can be done using tools in Ph...

casi 9 años hace | 0

| aceptada

Respondida
Matched Filter for FMCW radar?
In general, matched filter is defined as the conjugated reversed waveform and that definition applies to FMCW waveform too. Howe...

alrededor de 9 años hace | 0

| aceptada

Respondida
how can i plot axis with origin at a random point other than (0,0) as origin
Here is an example plot(0:9,0:9); set(gca,'XTickLabel',get(gca,'XTick')+98); set(gca,'YTickLabel',get(gca,'YTick')+10...

alrededor de 9 años hace | 0

Respondida
Subarray Simulation have different output by using similar method
Conceptually the two approach is equivalent. The discrepancy you see is related to how you generate the custom antenna in your s...

alrededor de 9 años hace | 0

| aceptada

Respondida
Forming a block diagonal matrix of one certain matrix?
eval(sprintf('Out = blkdiag(A%s);',repmat(',A',1,99))) HTH

alrededor de 9 años hace | 0

Respondida
plotting sinuos curve using matlab
looks like it should be polarplot(phi,r) instead of polarplot(r,phi) HTH

alrededor de 9 años hace | 0

Respondida
Envelope(signal,np,'peak') error in Matlab R2015b
Do you have another |envelope| function on your path? What does which envelope return? If it does not point to the one u...

alrededor de 9 años hace | 0

Respondida
Matrix with binomial permutation
dec2bin(0:2^K-1)-'0'+1 HTH

alrededor de 9 años hace | 2

| aceptada

Respondida
simpler way to make new matlab function compatible to early version
I believe in a function, MATLAB does some static analysis so it sees flip first as a variable, even though it represents an anon...

alrededor de 9 años hace | 0

Respondida
matlab code to generate frequency signal with RF values
I'm not sure what you mean but you can generate a 3000 Hz signal like below f = 3000; N = 1000; % number of samples in ...

alrededor de 9 años hace | 0

Respondida
Undefined function or variable 'aviread'. >> aviread('traffic.avi'); Undefined function or variable 'aviread'.
|aviread| is not part of MATLAB installation provided by MathWorks. You can find it in File Exchange. However, if your goal is t...

alrededor de 9 años hace | 1

Respondida
how to get only the important bandwidth of a sound
You may want to look into either |powerbw| or |obw| instead <https://www.mathworks.com/help/signal/ref/obw.html> <https://...

alrededor de 9 años hace | 1

| aceptada

Respondida
Question about utilizing FFT, convolution and LTI systems
The FFT corresponds to the circular convolution rather than the linear convolution. I would do the following N = numel(o_t)...

alrededor de 9 años hace | 0

| aceptada

Respondida
array average every 30 values
squeeze(mean(reshape(A,30,48,31))) Assuming |A| is the matrix HTH

alrededor de 9 años hace | 0

| aceptada

Respondida
Is it possible to perform acoustic beamforming with a 2 microphone ULA for real world speech ?
I'm not an expert on microphone arrays but here is how I look at it. The performance of a beamforming algorithm depends on th...

alrededor de 9 años hace | 0

Cargar más