Respondida
Reciever Accumulator in Simscape inlet Liquid and Vapour problem
It doesn't matter what state/mixture goes INTO the receiver from which port; the block will get what's coming in. When the flui...

7 meses hace | 0

| aceptada

Respondida
2P-2P Heat Exchanger
A few thoughts: (1) maybe use a system-level heat exchanger (2P-2P) as a starting point, so you have a model that you can simul...

7 meses hace | 0

| aceptada

Respondida
Simcape real gas properties for N and H2
Coolprop is free. They also have MATLAB wrapper.

7 meses hace | 0

Respondida
Brazed plate heat exchanger on Simscape
I would recommend the following combination of options: The key is to choose "generic" for tube section, so you can set th...

7 meses hace | 2

| aceptada

Respondida
two-phase flow 4-way valve
You may follow this example on how to make a N-way valve manually. https://www.mathworks.com/help/simscape/ug/hydraulic-actuato...

7 meses hace | 0

Respondida
Simscape how to set up a multi-process evaporator or condenser
The architecture looks right: refrigerant in series and air flow in parallel, like the actual heat exchanger. A few things to p...

7 meses hace | 0

| aceptada

Respondida
How to model tanks with inlets above liquid level - partially filled pipes missunderstood?
You can find here two examples on how to use a tank block and a partially filled pipe together in an isothermal liquid model. T...

8 meses hace | 0

| aceptada

Respondida
Binary Mixtures using coolprop in Matlab
Looks like you can use the MATLAB wrapper for Coolprop to define a mixture and query the properties, like below: py.CoolProp.Co...

9 meses hace | 1

Respondida
How to plot pump and system curve based on the hydraulic model in Simscape / Simulink?
To summarize the discussion from the comments section: The pump curves can be generated from the pump blocks in Simscape Fluids...

9 meses hace | 0

Respondida
Connection between corrected mass flow and pressure ratio in the Turbine (G) Block
Summary from the discussion in the Comments section. While the formulation isn't given in the Documentation page of the Turbine...

9 meses hace | 0

Respondida
Definition of Reynolds number for MA side in Heat Exchanger (2P-MA) model
I checked the source code: for generic geometry, the hydraulic diameter is calculated as 4 * generic_fluid_volume / generic_he...

9 meses hace | 0

Respondida
Heat Pump Air Conditioner
Hello, I would suggest that you take a close look at this Documentation page "Model a Refrigeration Cycle" https://www.mathwor...

9 meses hace | 0

| aceptada

Respondida
Two-phase exchanger with evaporator that loses pressure at the outlet.
Check out this documentation page and carefully follow the workflow. https://www.mathworks.com/help/hydro/ug/modeling-a-refrige...

9 meses hace | 1

Respondida
Implementation of two-phase liquid out of REFPROP into simscape
In the same Documentation page, there is an example of using the same command to assign the properties to a Two-Phase Fluid Prop...

9 meses hace | 0

| aceptada

Respondida
How can I solve the error generated by a T-Junction when there is a Parallel Channels block in my simscape fluid model?
Hi Miguel, In the model you shared, the T-junction has the default initial flow target of 0 at all ports and "high" priority. ...

10 meses hace | 1

Respondida
Data center Simscape modelling
There is a shipping example on data center cooling, in R2023a. https://www.mathworks.com/help/hydro/ug/data-center-cooling.html...

10 meses hace | 0

Respondida
Fin Surface Area Condenser-Evaporator (2P-MA) Simscape Fluids
In the parameter dialog, the fin area for the MA side are for those thin foil/sheet you see on the outside of the tubes. The wa...

10 meses hace | 1

| aceptada

Respondida
Cooling system whit Ammonia not run
Hi Francesco, We believe the error has to do with the fact that NH3 has a non-monotonic supercritical line. It needs to be fix...

10 meses hace | 0

Respondida
Error using System-Level Refrigeration Cycle (2P)
Hi Carlo, We believe the error has to do with the fact that NH3 has a non-monotonic supercritical line. It needs to be fixed i...

10 meses hace | 0

Respondida
Simscape two-phase fluid in closed accumulator looses pressure
Hi Patrick, I believe what you are seeing is the result of the "upwind energy scheme" implemented at all ports of thermo-fluids...

11 meses hace | 1

| aceptada

Respondida
how mixing pressure Pm is calculated in gas ejector model of Matlab
This pm term is EVERYWHERE in the governing equations of the ejector. It's solved for implicitly to keep the system of equation...

11 meses hace | 0

Respondida
How to model actuator ports in Simscape fluids?
I'd encourage you to think more about the "effect" of a port in the actual system, instead of just having the actually values of...

11 meses hace | 0

Respondida
issues on Heat exchanger in simscape TL-MA
Setting reasonable parameters to discribe the nominal conditions for the heat exchanger seem to resolve the issue. Pay particul...

11 meses hace | 0

| aceptada

Respondida
In a Simscape Fluids/Hydraulic/IL centrifugal pump model, why is the flow higher after narrow pipe than directly after the pump?
In the Isothermal Liquid domain, the density of the fluid is a function of the pressure. See this documentation page: https://w...

12 meses hace | 2

| aceptada

Respondida
How can I mode the refrigeration cycle considering frosting in the evaporator in simscape
Hi Shuping, You are correct about the condensed water being removed right away (like magic) from the MA domain. Therefore, no ...

12 meses hace | 0

Respondida
Modelling a layer of water crossed by a water circulation.
Hi Lucas, Check out the attached modified .ssc file and a simple test harness. I keep most of the equations from constant volu...

12 meses hace | 0

| aceptada

Respondida
problem with ssc_build to generate custom simscape library
The input to the ssc_build command should be the directory name, instead of the .ssc file name. The directory can contain multi...

12 meses hace | 0

| aceptada

Respondida
Two-Phase Cascade Heat Exchanger
Suggestion: check the parameters you've set for the heat exchanger, source, and reservoir blocks. Pay special attention to the ...

12 meses hace | 0

| aceptada

Respondida
Modelling a layer of water crossed by a water circulation.
For the thermal liquid and almost all other fluids domains, you'll see a "port_convection" connection in the component block. C...

12 meses hace | 0

Respondida
variation of liquid and gas over time and the pressure variation inside a tank
The two absoluate reference block I believe will enforce the temperature and pressure to be 0K and 0Pa, respectively. Use Cap i...

12 meses hace | 0

| aceptada