I am currently working in the Engineering Development Group at the Mathworks office in Hyderabad.

DISCLAIMER: Any advice or opinions here are my own, and in no way reflect that of Mathworks.

Answered

Can I pass fitobject as a variable to a function

Hi, It is possible to pass cfit object directly to lsqnonlin function. [Widths,resnorm,res,eflag,output1] = lsqnonlin(cfit, ...

Can I pass fitobject as a variable to a function

Hi, It is possible to pass cfit object directly to lsqnonlin function. [Widths,resnorm,res,eflag,output1] = lsqnonlin(cfit, ...

alrededor de 11 horas ago | 0

Answered

How to install missing Float center Directional Control valve in Simulink library

Hi, The configuration highlighted in the figure can be obtained by setting values of opening offset parameters as given against...

How to install missing Float center Directional Control valve in Simulink library

Hi, The configuration highlighted in the figure can be obtained by setting values of opening offset parameters as given against...

alrededor de 12 horas ago | 0

Answered

interp3 returns "Input grid is not a valid MESHGRID."

Hi, I think this error may be due to two reasons: The input arguments x, y, z to the interp3 function must be either grid ve...

interp3 returns "Input grid is not a valid MESHGRID."

Hi, I think this error may be due to two reasons: The input arguments x, y, z to the interp3 function must be either grid ve...

alrededor de 15 horas ago | 0

Answered

num2cell at high dimensions - is this a bug?

Hi, The function ‘num2cell’ is intended to work properly when all the values of dim vector are between 1 and ndims(A), if A is...

num2cell at high dimensions - is this a bug?

Hi, The function ‘num2cell’ is intended to work properly when all the values of dim vector are between 1 and ndims(A), if A is...

1 día ago | 0

Answered

Storing values from a loop when both sym and solve is involved?

Hi, Assuming the values of L to be numeric, you could try declaring an empty variable and then append the values obtained, ea...

Storing values from a loop when both sym and solve is involved?

Hi, Assuming the values of L to be numeric, you could try declaring an empty variable and then append the values obtained, ea...

3 días ago | 0

Answered

How to add SIMPACK to Matlab

Hi, There aren’t any specific Add-Ons but you could refer the following link for required products to use SIMPACK models with ...

How to add SIMPACK to Matlab

Hi, There aren’t any specific Add-Ons but you could refer the following link for required products to use SIMPACK models with ...

5 días ago | 0

Answered

How do I add a marker to only specific frames in a video

Hi, As you know the indices of frames to mark, you can use readFrame function to read those frames from video and then use ins...

How do I add a marker to only specific frames in a video

Hi, As you know the indices of frames to mark, you can use readFrame function to read those frames from video and then use ins...

alrededor de 1 mes ago | 0

| accepted

Answered

First Col to Rep Date in Double Array

Hi, You can use timetable array which associates a time with each row and then plot them against date and time using stackedpl...

First Col to Rep Date in Double Array

Hi, You can use timetable array which associates a time with each row and then plot them against date and time using stackedpl...

alrededor de 1 mes ago | 0

| accepted

Answered

How can I extract daily data of over 40 years to calculate monthly mean?

Hi, The data in the csv file can be imported into MATLAB either as vectors or numeric matrix. Try importing as numeric matrix ...

How can I extract daily data of over 40 years to calculate monthly mean?

Hi, The data in the csv file can be imported into MATLAB either as vectors or numeric matrix. Try importing as numeric matrix ...

alrededor de 2 meses ago | 0

Answered

omnidirectional antenna radiation pattern

Hi, Radiation pattern of an antenna at a given frequency can be visualized using pattern function. This function requires Ante...

omnidirectional antenna radiation pattern

Hi, Radiation pattern of an antenna at a given frequency can be visualized using pattern function. This function requires Ante...

alrededor de 2 meses ago | 0

Answered

Function: plotAssetHist undefined

Hi, I think supporting function named 'plotAssetHist' is missing.Try using the suppoting function given in the link.

Function: plotAssetHist undefined

Hi, I think supporting function named 'plotAssetHist' is missing.Try using the suppoting function given in the link.

alrededor de 2 meses ago | 0

| accepted

Answered

Can we import solidworks files on matlab without have the solidworks software?

Hi, You can import 3D files with the following formats without needing the software used to create 3D model files: 'fbx', 'dae...

Can we import solidworks files on matlab without have the solidworks software?

Hi, You can import 3D files with the following formats without needing the software used to create 3D model files: 'fbx', 'dae...

alrededor de 2 meses ago | 1

Answered

How to duplicate "rmoutliers" function in EXCEL program ?

Hi, From the excel sheet attached, outliers in the data are 39.29 and 36.00. I think this is correct way to find outliers. The...

How to duplicate "rmoutliers" function in EXCEL program ?

Hi, From the excel sheet attached, outliers in the data are 39.29 and 36.00. I think this is correct way to find outliers. The...

alrededor de 2 meses ago | 0

Answered

Create the table in the MS word

Hi, Assuming you are trying to create a table of images and text in different columns, images can be stored as arrays in the t...

Create the table in the MS word

Hi, Assuming you are trying to create a table of images and text in different columns, images can be stored as arrays in the t...

alrededor de 2 meses ago | 0

Answered

About Bayes Optimization input

Hi, Here is an example of applying Bayesian optimization to deep learning and finding optimal network hyperparameters. Hope th...

About Bayes Optimization input

Hi, Here is an example of applying Bayesian optimization to deep learning and finding optimal network hyperparameters. Hope th...

alrededor de 2 meses ago | 0

Answered

How to setup a JTAG communication between FPGA board and Matlab?

Hi, Refer this for hardware and software requirements for JTAG communication between FPGA board and MATLAB or Simulink. You ca...

How to setup a JTAG communication between FPGA board and Matlab?

Hi, Refer this for hardware and software requirements for JTAG communication between FPGA board and MATLAB or Simulink. You ca...

alrededor de 2 meses ago | 0

Answered

Can I connect more structure in one ?

Hi, If there is a structure ‘S’ with fields ‘x’ and ‘y’, you can access field ‘x’ using dot notation as S.x. Assuming that you...

Can I connect more structure in one ?

Hi, If there is a structure ‘S’ with fields ‘x’ and ‘y’, you can access field ‘x’ using dot notation as S.x. Assuming that you...

2 meses ago | 0

Answered

How can I use the value of one index in a structured element as the index in a logical statement?

Hi, I would like to assume dimensions of data field in structure ‘a’ as 43977 x 20 for easy understanding. According to the co...

How can I use the value of one index in a structured element as the index in a logical statement?

Hi, I would like to assume dimensions of data field in structure ‘a’ as 43977 x 20 for easy understanding. According to the co...

2 meses ago | 0

Answered

MATLAB Coder: Runtime Error due to 'Undefined Variable'

Hi, From the code provided, I noticed that the second argument to ‘butter’ function keeps changing for every iteration. For co...

MATLAB Coder: Runtime Error due to 'Undefined Variable'

Hi, From the code provided, I noticed that the second argument to ‘butter’ function keeps changing for every iteration. For co...

2 meses ago | 1

| accepted

Answered

Problem using 'integral' when an endpoint is the target variable for an enclosing integral

Hi, The second and third input arguments to integral function must be scalars. From the code provided, I think either of the v...

Problem using 'integral' when an endpoint is the target variable for an enclosing integral

Hi, The second and third input arguments to integral function must be scalars. From the code provided, I think either of the v...

2 meses ago | 0

Answered

Problem with plotting symsum

Hi, I noticed that the dimensions of arrays being multiplied does not match. According to the code provided, the term cos(n*p...

Problem with plotting symsum

Hi, I noticed that the dimensions of arrays being multiplied does not match. According to the code provided, the term cos(n*p...

2 meses ago | 0

Answered

How to loop function 1000 times

Hi, You can try writing a MATLAB function defining the code in your script. Output of the function can be monthly amount of p...

How to loop function 1000 times

Hi, You can try writing a MATLAB function defining the code in your script. Output of the function can be monthly amount of p...

2 meses ago | 0

Answered

How to takeout the frequancy from FFT

Hi, To find frequencies corresponding to peaks after computing fft, you can try using findpeaks function. Specify second inpu...

How to takeout the frequancy from FFT

Hi, To find frequencies corresponding to peaks after computing fft, you can try using findpeaks function. Specify second inpu...

2 meses ago | 0

Answered

Cannot uninstall R2019a and how to do?

Hi, Because the OS is unknown, you can refer here to uninstall MATLAB on Windows. Hope this helps.

Cannot uninstall R2019a and how to do?

Hi, Because the OS is unknown, you can refer here to uninstall MATLAB on Windows. Hope this helps.

2 meses ago | 0

Answered

How can i convert the analog input(voltage) from thermistor(sensor) to temperature(celsius)?

Hi, I think you can try using Simulink thermistor block to build a circuit to convert analog input voltage to temperature. Ot...

How can i convert the analog input(voltage) from thermistor(sensor) to temperature(celsius)?

Hi, I think you can try using Simulink thermistor block to build a circuit to convert analog input voltage to temperature. Ot...

2 meses ago | 0

Answered

how to delete the units from a plot

Hi, There is no option to get rid of units being displayed after X-label and Y-label using Toolbox Preferences Editor. Replaci...

how to delete the units from a plot

Hi, There is no option to get rid of units being displayed after X-label and Y-label using Toolbox Preferences Editor. Replaci...

2 meses ago | 0

| accepted

Answered

bin lat lon data and average

From question, I understood that there is a dataset containing columns of latitude, longitude, year, month and temperature. T...

bin lat lon data and average

From question, I understood that there is a dataset containing columns of latitude, longitude, year, month and temperature. T...

5 meses ago | 1

Answered

How to transmit a h.264 bitstream over USRP, receive it and decode it?

I found some functions on File Exchange for encoding and decoding data using H.264 standard. You can refer the following link: h...

How to transmit a h.264 bitstream over USRP, receive it and decode it?

I found some functions on File Exchange for encoding and decoding data using H.264 standard. You can refer the following link: h...

5 meses ago | 1

| accepted

Answered

Calculating Credible Intervals for observed data

I think credible interval is analogous to confidence interval. To find confidence interval, calculate mean and standard deviatio...

Calculating Credible Intervals for observed data

I think credible interval is analogous to confidence interval. To find confidence interval, calculate mean and standard deviatio...

5 meses ago | 1

Answered

help with looping the fopen and fclose to draw a continuous graph

If the order of processing is not important, then you can use dir function to list all the files in a folder. Output of this fun...

help with looping the fopen and fclose to draw a continuous graph

If the order of processing is not important, then you can use dir function to list all the files in a folder. Output of this fun...

5 meses ago | 1