Respondida
Define internalHeatSource in thermal transient axisymmetric model?
Hello Francesca, I understand that you are trying to simulate an exothermal reaction in MATLAB. You are getting an error tha...

alrededor de 1 año hace | 0

Respondida
Problème à l'installation de simscape multibody
Hello Nicolas, I understand that you are trying to install a Simscape multi body add on but getting an error. The warning ...

alrededor de 1 año hace | 0

Respondida
Create a matrice in a for loop
Hello Miguel, I understand that you are trying to find a way to create a matrix where each entry can be one or more values ba...

alrededor de 1 año hace | 0

Respondida
Warnings while compiling in MATLAB 2023b
Hello Rajiv, I understand that you are trying to figure out why the warnings provided in the question are being generated in ...

alrededor de 1 año hace | 0

Respondida
Matlab no reconoce variable t
Hello Cristina, I understand that you are trying to use “ode45” to solve system of equations but getting an error that variab...

alrededor de 1 año hace | 0

Respondida
행렬값으로 미지수 3개 구하기
Hello 찬양 곽, I understand that you are trying to find the values of 3 unknowns “Crp”, “Frp” and “Cd” using some equations. ...

alrededor de 1 año hace | 0

Respondida
Ich möchte zwei verschieden lange Arrays übereinander ploten.
Hello Aaron, I understand that you are trying to plot two variables on same plot, but each variable has different time steps ...

alrededor de 1 año hace | 0

Respondida
Curve fitting multiple lots of data within the same gscatter graph?
Hello Evan, I understand that you are trying to fit curves to multiple categories of data plotted in a single scatter plot. ...

alrededor de 1 año hace | 0

Respondida
How to create a good load spectrum envelope from a noisy spectrum?
Hello Andriy, I understand that you are trying to get a smooth envelope for a noisy signal. For getting the envelope of a...

alrededor de 1 año hace | 0

Respondida
How can I plot an X-Z slice of a Surface Plot on a given Y value
Hello Shelton, I understand that you are trying to plot an X-Z slice of a surface plot for a given value of y. This can be ...

alrededor de 1 año hace | 0

Respondida
Least square fit in Hovmöller
Hello Luis, I understand that you are trying to do least square fit onto Hovmöller Data. For doing least square fit onto dat...

alrededor de 1 año hace | 0

Respondida
How to prevent overlapping of 3D subplots when changing camera position/target?
Hello GroupRing303, As per my understanding you are trying to zoom in on one of the figures but do not want the zoomed in fig...

alrededor de 1 año hace | 0

Respondida
I want to see inside lateralControllerFcn which is inside of Lateral Controller Stanley Block it was written as codegen
Hello Berke, As per my understanding you are trying to know the code of “lateralControllerStanley“function. This could be ...

alrededor de 1 año hace | 0

Respondida
creating a 3D hexahedral grid from coordinates
Hello Katharina, As per my understanding you are trying to create a grid from given set of coordinates. This can be achiev...

alrededor de 1 año hace | 0

Respondida
自定义方程拟合曲线计算出现复数值 无法拟合
Hello Han, As per my understanding you are trying to fit the data into a custom equation of the required form but are getting i...

alrededor de 1 año hace | 1

Respondida
Humidity Transients signal correction model advice
Hello Dharmesh, As per my understanding you would like to remove/correct the spikes from the humidity signal obtained from sens...

alrededor de 1 año hace | 0

Respondida
Anyone please help in correcting my code for Id vs Vgs of AlN\GaN HEMT
Hello Nudrat, I understand that you are trying to plot “Id” vs “Vgs” curve using pre-defined parameters and formula but getting...

alrededor de 1 año hace | 0

Respondida
I am taking plot for Id-Vgs plot of AlN\GaN HEMT
Hello Nudrat, I understand that you are trying to plot drain current vs gate voltage, but you are getting an erroneous curve. ...

alrededor de 1 año hace | 0

Respondida
How can I use a preselected file in the Current Folder pane in executing a script?
Hello James, I understand that you are trying to find a method of using different .mat files in the file without having to load...

alrededor de 1 año hace | 0

Respondida
is it possible to plot hexagonal grid in geoplot?
Hello Sierra, I understand that you are trying to plot hexagonal grids on top of your “geoplot”. The following files from the ...

alrededor de 1 año hace | 0

Respondida
Why trust-region algorithm is not available in Simulink?
Hello Elia, I understand that you are trying to use trust-region algorithm in fsolve in Simulink. The trust-region algorithm ...

alrededor de 1 año hace | 0

Respondida
How can i get output?
Hello, I understand that you are trying to solve a differential equation using “dsolve” but you are getting an empty sym. This...

alrededor de 1 año hace | 1

Respondida
'Input' Keyword not detected
Hello Ricard, I understand that you are trying to build a custom component for Simscape using MATLAB. The keyword “input” is ...

alrededor de 1 año hace | 0

Respondida
詢問如何做出斜座標圖
Hello Jesse, I understand that you are trying to visualise the result of addition of 2 vectors in 3-dimensional space. You ...

alrededor de 1 año hace | 0

Respondida
I am trying to plot Id Vs Vds of AlGaN HEMT. I have written the code but I am getting a straight line. Please check this code
Hello Nudrat, I understand that you are trying to plot the relation between variables “Id” and “Vds”. In the code mentioned abo...

alrededor de 1 año hace | 0

Respondida
In Simulink, I want to display the value of x from 0 to 5 sec with a time interval of 0.05 sec, is the above code logic inside MATLAB fcn block correct ? If, no then suggest ?
Hello, I understand that you are trying to display the value of the variable “x” for every 0.05 seconds using a MATLAB function...

alrededor de 1 año hace | 0

Respondida
How can I set good Axis Limits manually?
Hello, I understand that you are trying to use the variable “iOP_tickdiff” to represent the spacing of elements in “i_posstick...

alrededor de 1 año hace | 0

| aceptada