Community Profile

photo

Diego Kuratli


27 total contributions since 2017

Contact

Diego Kuratli's Badges

  • Revival Level 2
  • 3 Month Streak
  • Knowledgeable Level 2
  • First Answer

View details...

Contributions in
View by

Answered
Simulink Real-Time - Communication on Target PC in latest versions
When you upgrade MATLAB in your development PC, you have to upgrade the real-time kernel on your target machine too. In other wo...

8 días ago | 1

| accepted

Answered
Get parameter value from named parameter in Simulink in Simulink Real-time
For reading and writing parameters during real-time execution, you can use the following functions: getparam(tg, 'Ki_speed') s...

8 días ago | 0

| accepted

Answered
Error when doing Real-Time Simulink in External Mode "Unable to create mex function"
Are you using Simulink Real-Time as System target file in your model Configuration Parameters? Try to clear the SLRT compiler:...

alrededor de 1 mes ago | 0

Answered
example of non direct feed through using matlab function block
By looking at the example provided in the doc link you shared, I think you are confusing/mixing inputs and persistent values. I...

alrededor de 1 mes ago | 1

| accepted

Answered
Simulink Real Time Target (Beaglebone Black/Green)
Simulink Real-Time is designed for x86 systems with Intel CPUs provided by Speedgoat. Beaglebone hardware is not supported.

alrededor de 1 mes ago | 0

| accepted

Answered
Does anyone know when/if BLAS libraries are used in Simulink Real-time?
Simulink Real-Time has its own version of the BLAS (XPC_BLAS). This library should be used by default.

alrededor de 1 mes ago | 0

| accepted

Answered
RS232 on Speedgoat
To get started with serial communication with Simulink Real-Time, please check: https://www.mathworks.com/matlabcentral/answers...

2 meses ago | 0

Answered
Setting/Tuning parameters of a Simulink model in Realtime
Instead of the Resistor and Capacitor blocks, use Variable Resistor and Variable Capacitor.

2 meses ago | 0

Answered
Matlab R2016b & Simulink Real-Time : Subscript indices must either be real positive integers or logicals when compiling model
This seems a compiler configuration issue. Type >> slrtsetCC('VisualC','') Then, select the VS2017 compiler using >> mex -set...

2 meses ago | 0

Answered
Simulink real time network boot problem
The I217 Ethernet controller is not supported on R2016a.

2 meses ago | 0

Answered
Real-Time Application in standalone mode : Error unpacking application
What’s the filename length? Try with a filename <= 8 characters (you need to change the model name before build).

2 meses ago | 0

Answered
Enable function in TCP/IP communication
The mentioned examples for Simulink Real-Time require two real-time target machines from Speedgoat. In other words, you cannot r...

2 meses ago | 0

| accepted

Answered
Simulink communication with a physical CAN device
You can use Simulink Real-Time and Speedgoat real-time target machine with a CAN I/O module. You will generate a real-time appli...

4 meses ago | 0

| accepted

Answered
Logitech G29 with simulink
For desktop simulation, you can use this block: https://www.mathworks.com/help/sl3d/joystickinput.html

6 meses ago | 0

Answered
EtherCAT PDO Receive | EtherCAT receive variable | receive all signals at once (demux later)
The EtherCAT blocks in SLRT read the information provided by the EtherCAT Network Information (ENI) XML file. If you want to com...

alrededor de 1 año ago | 0

Answered
Pin toggle frequency in Simulink Real Time
The MCDAQ is not supported by Simulink Real-Time and therefore I guess you are using a different product or third-party drivers?...

alrededor de 1 año ago | 0

Answered
I cannot connect my host computer to the target using simulink real time.
The target requires Simulink Real-Time kernel (which is typically loaded from DOS environment, not Windows). If you are using Sp...

alrededor de 1 año ago | 0

| accepted

Answered
Problems with slrttest in the reboot
Which MATLAB release are you using? I suspect the version of real-time kernel on the target does match with the the MATLAB relea...

alrededor de 1 año ago | 0

| accepted

Answered
Speedgoat terminal board pin number relation to channel vector?
Typically, the speedgoat_IO333_06_all_io FPGA bitstream is for system testing purposes only. You might have a Custom Implementat...

más de 1 año ago | 0

Answered
'IDENTIFIER input must be a valid MATLAB message identifier' error when I try to build a simulink model to Speedgoat performance, Can connect to the target from development PC (ping it), and run model but get error on model build
This error can appear if the real-time kernel on the target machine has a different version than the MATLAB release on the devel...

más de 1 año ago | 0

Answered
HDL Workflow advisor not recognizing Target Platform: Speedgoat IO333, when Target workflow is set to Simulink Real-Time FPGA IO (running v R2016a)
To enable HDL Coder for Speedgoat FPGA-based I/O modules, you require a dedicated HDL Coder integration package. Also, while the...

más de 1 año ago | 0

| accepted

Answered
How to run a model on a speedgoat baseline, without beeing connected to the hardware via ethernet (autostart of the model when real time target is powered on)
Hi Olivier, For using Standalone mode with Speedgoat target machines, please follow the instructions from the Speedgoat docum...

más de 1 año ago | 1

| accepted

Answered
control of piezo actuator in Simulink Real-Time
Do you already have a real-time target machine with the required I/O channels to interface to the piezo actuator? The PID Con...

más de 1 año ago | 0

Answered
Do I have to use Speedgoat machines if i want to use Simulink Real Time?
Hi Ye Yuan, The xPC concept was hard to maintain and support. xPC users were facing many compatibility issues, due to new tec...

más de 1 año ago | 0

Answered
Speedgoat IO601 library blocks in Polyspace Bug Finder
Currently, Speedgoat I/O drivers are not certified for any specific standard. Although we ensure high quality products, Simulink...

alrededor de 2 años ago | 0

| accepted

Answered
Speedgoat IO601 block s-functions
The Support non-inlined s-function option appears for ERT-based targets. This is not related to the IO601 drivers, but generally...

alrededor de 2 años ago | 0

| accepted

Answered
Experienced volunteers for Speedgoat library
Çevikalp, Please let me know what are your questions related to Speedgoat, or feel free to contact our support team (support@...

alrededor de 2 años ago | 0

| accepted