Respondida
Can I use HDL Verifier cosimulation blocks in a Simulink model with continuous states?
During HDL co-simulation using HDL Verifier, the generated HDL code is being tested. The HDL code generation step requires Fixed...

más de 11 años hace | 0

Respondida
Can I plot a subset (reduced frequency range) of S-parameters?
You can use the 'plot' command and use the condition, value pair to define a range of frequency: http://www.mathworks.com/hel...

más de 11 años hace | 0

Respondida
customize Simulink Scope - default settings set
This functionality is not available in latest release of MATLAB R2014b. There are couple of workarounds I can think of: * You...

más de 11 años hace | 0

| aceptada

Respondida
Using set_param to change parameter DataTypes in Packet Input block does not work.
In order to specify the DataTypes, try using ''double'' instead of 'double'. Thanks, Sandip, MathWorks

más de 11 años hace | 0

| aceptada

Respondida
How can I control power using current in DC/DC converter.
SimElectronics has a DC-DC Converter block: http://www.mathworks.com/help/releases/R2014b/physmod/elec/ref/dcdcconverter.html...

más de 11 años hace | 0

Respondida
FatalException Error when opening Simulink
You should try disabling any security software that may be running on your machine, and attempt to launch MATLAB as an administr...

más de 11 años hace | 0

Respondida
Example for DSP F28335
There is a example which is using F28335 in Simulink: http://www.mathworks.com/help/supportpkg/texasinstrumentsc2000/examples...

más de 11 años hace | 0

Respondida
Report Generator: how to add a line break in Paragraph or Text
When you incorporate a 'text' field, documentation below: http://www.mathworks.com/help/rptgen/ug/text.html There is an opti...

más de 11 años hace | 0

Respondida
Is there a way to get the source code for functions in communication system toolbox?
You can always look at the source code of the MATLAB functions which are shipped, for e.g., all the functions on the following l...

más de 11 años hace | 0

| aceptada

Respondida
recover time history from power spectral data...
The mapping from Power Spectrum back to time history is not unique. By definition, power spectrum has no phase information in th...

más de 11 años hace | 1

| aceptada

Respondida
Can one run Matlab/Simulink models via Bluetooth on a Lego Mindstorm EV3 brick ?
Sorry, I mis-read the documentation, you are right, as of MATLAB R2014b EV3 is not supported for bluetooth on Simulink yet and o...

más de 11 años hace | 0

| aceptada

Respondida
Can one run Matlab/Simulink models via Bluetooth on a Lego Mindstorm EV3 brick ?
As mentioned in the documentation here: http://www.mathworks.com/help/supportpkg/legomindstormsev3io/ug/connect-to-an-ev3-bri...

más de 11 años hace | 0

Respondida
Back-emf Constant (V/rpm) of PM DC machine
You indeed are correct, it should be V/rad/s compared to the mentioned V/rpm at the following location: http://www.mathworks.co...

más de 11 años hace | 0

Respondida
Induction Machine Stator-Rotor turns ratio
I understand you are referring to this Asynchronous machine: http://www.mathworks.com/help/physmod/sps/powersys/ref/asynchron...

más de 11 años hace | 0

Respondida
Cannot open source file "Mfx.h", #include "Mfx.h"
This is happening because in Configuration Parameters > Code Generation > Interface > Code replacement library is set to AUTOSAR...

más de 11 años hace | 1

| aceptada

Respondida
Create a Simulink Library Installer
As per the documentation, need to write a 'slblocks.m' and have the library model together. http://www.mathworks.com/help/sim...

más de 11 años hace | 1

Respondida
How to set Default Configuration in Simulink with Commands?
There is a really detailed documentation to do so: http://www.mathworks.com/help/simulink/ug/configuration-set-api.html? T...

más de 11 años hace | 1

Respondida
Simulink Embedded Coder C2000 F28069M
As of Embedded Coder R2014b, F28069M is not supported and there is no update to be downloaded to have this hardware show up in t...

más de 11 años hace | 1

Respondida
Simulink matrix multiplication error
Based on the error message, it looks like the second signal is 12x1, but the first signal is not as expected, i.e., 4x12. Maybe ...

más de 11 años hace | 1

Resuelto

Weighted average
Given two lists of numbers, determine the weighted average. Example [1 2 3] and [10 15 20] should result in 33.333...

casi 14 años hace

Resuelto

Fibonacci sequence
Calculate the nth Fibonacci number. Given n, return f where f = fib(n) and f(1) = 1, f(2) = 1, f(3) = 2, ... Examples: Inpu...

casi 14 años hace

Resuelto

Finding Perfect Squares
Given a vector of numbers, return true if one of the numbers is a square of one of the other numbers. Otherwise return false. E...

casi 14 años hace

Resuelto

Who Has the Most Change?
You have a matrix for which each row is a person and the columns represent the number of quarters, nickels, dimes, and pennies t...

casi 14 años hace

Resuelto

Determine whether a vector is monotonically increasing
Return true if the elements of the input vector increase monotonically (i.e. each element is larger than the previous). Return f...

casi 14 años hace

Resuelto

Swap the first and last columns
Flip the outermost columns of matrix A, so that the first column becomes the last and the last column becomes the first. All oth...

casi 14 años hace

Resuelto

Find all elements less than 0 or greater than 10 and replace them with NaN
Given an input vector x, find all elements of x less than 0 or greater than 10 and replace them with NaN. Example: Input ...

casi 14 años hace

Resuelto

Triangle Numbers
Triangle numbers are the sums of successive integers. So 6 is a triangle number because 6 = 1 + 2 + 3 which can be displa...

casi 14 años hace

Resuelto

Make a checkerboard matrix
Given an integer n, make an n-by-n matrix made up of alternating ones and zeros as shown below. The a(1,1) should be 1. Example...

casi 14 años hace

Resuelto

Add two numbers
Given a and b, return the sum a+b in c.

casi 14 años hace

Resuelto

Column Removal
Remove the nth column from input matrix A and return the resulting matrix in output B. So if A = [1 2 3; 4 5 6]; and ...

casi 14 años hace