Respondida
How can I add two fft functions?
Hi Anagha A=1; t=0:0.001:0.1; Here, the sampling frquency is 1000 Hz ... but the frequency of x is 1046 Hz. Assuming x shoul...

alrededor de 2 años hace | 0

| aceptada

Respondida
Comparing Analog Butterworth vs Bessel Filters shows large differences in coefficients and filtered data.
Hi Xavier, For "an analog Butterworth" filter, the code would be (butter) % All frequency values are in Hz. Fs = 20000; % Sa...

alrededor de 2 años hace | 0

| aceptada

Pregunta


Why Does Format of Data Returned from readtable() Depend on Import Options that are Not VariableTypes?
Here is the file type text1.csv When read without options, the table output is as expected. t1 = readtable('text1.csv') But ...

alrededor de 2 años hace | 2 respuestas | 1

2

respuestas

Respondida
Apply Filter to Signal
I think this is the correct way to generate the output signal fs = 16e3; t = 0:(1/fs):1; % not defined in question numFilts=...

alrededor de 2 años hace | 1

| aceptada

Respondida
LQI with time-delay system
Yes, if using a Pade apporoximant for the time delay, then the Q matrix will have to be expanded to include the additional state...

alrededor de 2 años hace | 0

Respondida
Error in port widths or dimensions.
If it makes sense that the outputs of each Fuzzy Logic Controller is 3, then there is a problem at the the output of the highlig...

alrededor de 2 años hace | 0

Respondida
I have logged a signal from simulink to workspace in timeseries format and got 317 samples of that signal. Can i increase the number of samples i get or the sampling rate?
More samples of the logged signal can be collected by settng the Sample Time of the To Workspsace block to whatever sample time ...

alrededor de 2 años hace | 0

Respondida
How to plot this equation
syms U Delta beta T k_beta U = -Delta/2*tanh(beta*Delta/2) UoverDelta = U/Delta UoverDelta = subs(UoverDelta,beta,inv(k_beta*...

alrededor de 2 años hace | 0

Respondida
Derive function handle with a vector input argument
Hi Majeed, Maybe you're looking for something like this? q = [3 2 2 3]; p = sym('p',[1 4]); syms x y f = p(1)*x.^2+p(2).*y....

alrededor de 2 años hace | 0

Respondida
Load timeseries data from workspace for non-periodic data
In the Model Configuration parameters, change the Input field under Load From Workspace from ts to addsample(ts,'Data',ts.Data...

alrededor de 2 años hace | 0

| aceptada

Respondida
how to use freqz function correctly
If x is a digitalFilter object, then freqz can be called as freqz(x,f,fs); where f is vector of frequencies of interest to vis...

alrededor de 2 años hace | 0

Respondida
How to get the value of slopes of pchip at the enpoints?
The doc page pchip (under the Output Arguments, pp section) shows how the interpolationg polynominal is formed for each interval...

alrededor de 2 años hace | 1

| aceptada

Respondida
Struct as mask input
I did the following: 1) created a model child.slx. It has an Inport -> Gain -> Outport. The gain parameter is set to 'paramet...

alrededor de 2 años hace | 0

| aceptada

Respondida
Getting complex solution with Matlab ode45
It looks like your differential equation is very sensitive (I mean that loosely) A=-4.32; B=4; C=1.2; D=0.8; a=0.2778; ode...

alrededor de 2 años hace | 0

Respondida
two output in one scope
The easiest way is to log each signal in their respective .mdl file, simulate each, and then plot from the base workspace.

alrededor de 2 años hace | 1

| aceptada

Pregunta


Why are the Corners Shaded in the Model Reference Block?
Consider the block diagram at this doc link for model referencing. Why are the corner triangles shaded in the block for Counter...

alrededor de 2 años hace | 1 respuesta | 0

1

respuesta

Respondida
The problem with "contains"
Might not be faster, but .... LongStrings={'Apples are red' 'Lemons are yellow' 'Cucmbers are green' 'Some numbers are odd' 'Th...

alrededor de 2 años hace | 0

| aceptada

Respondida
I my tried to use for loop to find a transfer function and root louces
I think that rlocus(TF3) clears the figure and then overwrites, so I think you're actually getting the root locus for the last v...

alrededor de 2 años hace | 1

| aceptada

Respondida
Undefined function 'dksyn' for input arguments of type 'ss'. Error in Report8 (line 41) [k, cl, bnd] = dksyn ( G, 1, 1)
According to the doc page dksyn, the first input to the dksyn has to be a uss model, not an ss model. Mabye G should be built us...

alrededor de 2 años hace | 0

| aceptada

Respondida
Quicker way to subtract large vectors using a sliding window?
Hi goc3, Using filter seems to be a lot faster than the loop method 1 for Example 1. I didn't compare to the other loop method...

alrededor de 2 años hace | 1

| aceptada

Respondida
Error in port widths or dimensions
The system has 3 inputs, 2 outputs, and 2 states. The gain multiplications by A, B, C, and D need to be matrix*vector multiplica...

alrededor de 2 años hace | 0

| aceptada

Respondida
I need to find the transfer function of the close loop with the two variables gains using Simulink and math formulation
Hi ahmad, Neither Simulink nor the Control System Toolbox support any model with symbolic parameters. In both tools, everything...

alrededor de 2 años hace | 0

| aceptada

Respondida
In between the years, a PISA question (nothing essential): The last digit of 7^190
Well, if 7^190 is larger than realmax, then using double precison won't work to just try to compute it. You could try the Symbol...

alrededor de 2 años hace | 0

| aceptada

Respondida
How to add disturbance feedforward to LQI()
Hi John I don't udnerstand your observations absent additional information. If the control input includes the negative of the d...

alrededor de 2 años hace | 1

| aceptada

Pregunta


Do Orphaned sym Objects in the Symbolic Engine Matter?
Suppose I execute the following code func a. Did I just create an object in the symbolic engine that I have no way to access? ...

alrededor de 2 años hace | 1 respuesta | 0

1

respuesta

Respondida
gapmetric for MIMO LTI systems with unequal input and output dimensions
Hi Shivam, My interpretation of the doc page gapmetric is that the number of inputs to P1 has to be same as the number of input...

alrededor de 2 años hace | 2

| aceptada

Respondida
Finding strings with common character
type Gfile.txt % assuming strings to return are space delimited text = split(string(fileread('Gfile.txt'))); unique(text(star...

alrededor de 2 años hace | 0

Respondida
Add variable names to figure legends
Hi Ganesh, Add a second argument to the legend command % what you have figure h = plot(rand(3)); legend(h) % what you want...

alrededor de 2 años hace | 0

Respondida
How to combine argument validation with varargin
My understanding from reading Avoid Using varargin for Repeating Arguments is that putting varargin into a Repeating arguments b...

alrededor de 2 años hace | 3

| aceptada

Respondida
why the two split-step fourier methods using fft and ifft is equivalent ?
Let's take a simplified view of the loops in code1 and code2, and renaming the variables appropriately. Also, because of the way...

alrededor de 2 años hace | 0

| aceptada

Cargar más