Respondida
How to run code from a later line multiple times without restarting the whole script?
See Create and Run Sections in Code for how to divide the script (assuming it really is a scipt and not a function) into section...

7 meses hace | 0

| aceptada

Respondida
Trouble making a parameter sweep for Simulink
Try out = sim(model); More generally check out Simulink.SimulationInput and Optimize, Estimate, and Sweep Block Parameter Valu...

7 meses hace | 0

| aceptada

Respondida
Help with exporting variables from function to workspace to then run in simulink file
The "modern" way to do this with the sim command is to use a Simulink.SimulationInput as the input. See that doc page to get sta...

7 meses hace | 1

Respondida
Save data from Simulink Scope
"I have this setting: is it correct?" It's correct if you want all of your logged variables to be contained within a single var...

7 meses hace | 0

| aceptada

Respondida
How do I import an audio file into simulink?
Hi Victor, It's not clear why it would be more convenient to do this in Simulink, but if that's really the case then perhaps th...

7 meses hace | 0

| aceptada

Respondida
not saving data in workspace
Proabably because the model is set for a single simulation output. Go to: Model Settings -> Data Import/Export If the box is c...

7 meses hace | 0

Respondida
i am getting error when put definite integral of a ratio whose nemerator & denominator both are definte integral with variable limits.
Hi jagannath, In the original code, lmf and umf are function handles (having nothing to do with the sym variable x), and functi...

7 meses hace | 0

| aceptada

Respondida
Transpose Matrix in Simulink 2020a
The online doc doesn't go back as far as 2020a, but in 2021a one would use the Math Function block. I'm sure (well, nearly sure)...

7 meses hace | 0

Pregunta

Is There a Way to Create a Sequence of Polar Plots in a Tiled Layout Using arrayfun with an Anonymous Function?
Sample data s.th = pi/4:pi/4:2*pi; s.r = [19 6 12 18 16 11 15 15]; s(2) = s(1); s(2).th = s(2).th*1.3; If I want to make two...

7 meses hace | 1 respuesta | 1

1

respuesta

Respondida
effects of ifft2(x, 'symmetric') while x is not conjugate symmetric
It appears that only portions of the input matrix are used when 'symmetric' is specified on input to ifft2 and the input is 2D ...

7 meses hace | 1

Respondida
insAccelerometer Documentation h(x)
My take on this ... The equations in the code make sense assuming (1) the accelNav vector, which I assume (2) is a filter state...

8 meses hace | 1

Respondida
Error with Calling "dcmecef2ned" in Simulink
Hi Richard, In which version did it used to work? I'm assuming you're calling dcmecef2ned from inside a MatlabFunction block? ...

8 meses hace | 0

Respondida
Having trouble solving an equation
syms x eqn = sqrt(((((26892/(x)^3)+(254.7/(x^2)))/2)^2)+(6111.5/((x)^3))^2) == 19000; expand(eqn) solve is telling it can't f...

8 meses hace | 0

| aceptada

Pregunta

Does Symbolic Math Toolbox Formally Support Function Composition?
The doc page Create Symbolic Functions states "The Symbolic Math Toolbox™ currently does not support composite symbolic function...

8 meses hace | 1 respuesta | 0

1

respuesta

Respondida
Wrap part of a shape with a surface
Hi Robert, Perhaps something like this that draws a pathc between each height line? Salt to taste on the patch command. Is th...

8 meses hace | 0

| aceptada

Respondida
Weird behavior with Three-axis Inertial Measurement Unit
"Is the purpose of the IMU to simulate a real-life IMU, or something else?" The purpose of that model is to simulate a notional...

8 meses hace | 0

| aceptada

Respondida
Newtonian Mechanics vector solution needed to find the range of forces (P) that satisfy Fnetx = 0
Here is an algebraic solution; I suspect one could do the whole thing symbolically and then sub the numbers at the end. Note th...

8 meses hace | 0

Respondida
Bode plot with right half plane zero
Hi @Anindya, The bodeplot function offers options on controlling the appearance of the plot, including to force the phase betwe...

8 meses hace | 1

Pregunta

Why is Answers Now Showing "Ran in" Links?
AFAICT, the "ran in" link is just a link to the same question.

8 meses hace | 1 respuesta | 0

1

respuesta

Pregunta

Why Doesn't a Symbolic Matrix Equation Simplify Until After Applying subs() ?
Following code is to derive an expression for the derivative of the magnitude of a vector function of time. clearvars syms t r...

9 meses hace | 1 respuesta | 0

1

respuesta

Respondida
Obtaining the differential equations from graphical representation of the problem
One can implement the equations of motion in Simulink and then use linearize to get the differential equation, but that requires...

9 meses hace | 0

Pregunta

Is Assignment from symmatrix/symfunmatrix Consistent with Assignment from sym/symfun ?
I've just started using symmatrix and symfunmatrix and noticed a behavior that I don't understand and seems to be inconsistent w...

9 meses hace | 0 respuestas | 1

0

respuestas

Pregunta

How Does the 'All' Option Affect the Result of Symbolic simplify?
Start with a simple expression syms alpha beta real f = cos(beta)-cos(beta)*cos(alpha)^2 and try to simplify it: simplify(f)...

9 meses hace | 1 respuesta | 0

1

respuesta

Respondida
RC Circuit Simulation in Simulink Shows Incorrect Charging Time
Hi Xiaolong, Disclosure: I did not actually open your model. If you know the fastest system dynamics are on the order of 1e-6,...

9 meses hace | 0

Discussion

It is Time for the Symbolic Math Toolbox to Include dot and cross Functions
Edit 15 Oct 2025: Removed incorrect code. Replaced symmatrix2sym and symfunmatrix2symfun with sym and symfun respectively (latte...

9 meses hace | 0

Respondida
Gibbs-like behaviour with lowpass on long signals
Hi qfn, I think that lowpass, et. al. will result in transients due the large, effective steps at the endpoints. I think this ...

9 meses hace | 0

Respondida
What frame of reference is the CG input to the IMU in Aerospace pack?
Hi Mats, According to IMU Location the CG input is to be provided in a coordinate frame that is fixed to the body. However, the...

9 meses hace | 0

Respondida
Indexing based on part of a string
column1 = [1;2;1;2;1]; column2 = ["2025-02 A";"A 2025-02";"B";"a 2025-02 a";"b 2025-02 b"]; T = table(column1,column2) T(T.col...

9 meses hace | 1

| aceptada

Respondida
Run multiple Simulink model in parallel
Check out Run Multiple Simulations and links therefrom.

9 meses hace | 2

Discussion

Will Disucssions Front End be Updated to be Consistent with Back End?
Apparently, the back end here is running 2025b, hovering over the Run button and the Executing In popup both show R2024a. ver m...

9 meses hace | 0