Respondida
Unable to go to external mode
Have you tried manually setting the COM port to the accurate port? Another common issue that causes this - A MATLAB arduino obje...

alrededor de 9 años hace | 0

Respondida
Arduino-Simulink upon Arduino reset
If you follow this documentation page - https://www.mathworks.com/help/supportpkg/arduino/ug/run-model-on-arduino-hardware.html,...

alrededor de 9 años hace | 0

Respondida
multi-core raspberry pi
Have you tried following instructions from this documentation page? - https://www.mathworks.com/help/simulink/ug/solving-embedde...

alrededor de 9 años hace | 0

Respondida
How to upload .m file to Raspberry Pi by making raspberry pi standalone device using matlab ?
Or if you have MATLAB Coder here is the post that you can download and make your MATLAB code run standalone on Raspberry PI - ht...

alrededor de 9 años hace | 0

Respondida
Raspberry Pi 3 SPI - Blocks. How to start the SPI Communication?
Here is an example of using SPI communication with Raspberry PI and simulink - https://www.mathworks.com/help/supportpkg/raspber...

alrededor de 9 años hace | 1

Respondida
How to continuously real-time plotting graph from arduino to matlab (10k Variable Resistor)
Checkout this video - https://www.mathworks.com/videos/plotting-live-data-of-a-temperature-sensor-using-arduino-and-matlab-12131...

alrededor de 9 años hace | 0

Enviada

Arduino and Beyond Webinar files
Demo files from the Arduino and Beyond Webinar

más de 9 años hace | 229 descargas |

0.0 / 5

Enviada

Raspberry Pi based security system using MATLAB and Simulink
Files that were used in the webinar 'Raspberry Pi based security system using MATLAB and Simulink'

casi 10 años hace | 775 descargas |

5.0 / 5

Enviada

Obstacle Avoidance using LEGO Mindstorms EV3 and Simulink
This package contains files necessary to build your own robot that can avoid obstacles

alrededor de 10 años hace | 1680 descargas |

4.22222 / 5

Enviada

Arduino-Based Obstacle Game Using Simulink and Stateflow
This package contains the files necessary to create your own version of the obstacle game

alrededor de 10 años hace | 220 descargas |

0.0 / 5

Enviada

Create an Arduino-based robotic spider using Simulink and Stateflow
This package contains files necessary to build your own robotic spider

alrededor de 10 años hace | 379 descargas |

5.0 / 5

Enviada

Building Smart Robots with Simulink and Arduino Webinar Files
Demo files from the Building Smart Robots with Simulink and Arduino Webinar

alrededor de 10 años hace | 805 descargas |

4.0 / 5

Resuelto

Pizza!
Given a circular pizza with radius _z_ and thickness _a_, return the pizza's volume. [ _z_ is first input argument.] Non-scor...

alrededor de 10 años hace

Enviada

Creating an Oscillating Fan Using Simulink and Arduino
Learn how to use Simulink and Stateflow to build an Arduino based oscillating fan

alrededor de 10 años hace | 373 descargas |

0.0 / 5

Enviada

Detecting Gear Defects Using Simulink and Raspberry Pi
Learn how to use Simulink to create a Raspberry Pi based gear defect detector

alrededor de 10 años hace | 362 descargas |

5.0 / 5

Enviada

Edge Detection and Image Recognition
Uses Edge detection concepts to recognize an image.

más de 10 años hace | 254 descargas |

0.0 / 5

Respondida
Sampling rate is not accurate (Arduino support package)
If these are the only blocks in your model, then two more things to notice are sampling time of Workspace blocks and the samplin...

más de 10 años hace | 0

Respondida
Plotting live data from Arduino in Matlab
have you tried animatedline function in MATLAB? I doubt you can do 100% real-time with Arduino but I think this is what you are ...

más de 10 años hace | 0

Respondida
It is possible to read the status of a digital output port from an Arduino board with Matlab?
Have you tried using this function from the support package? http://www.mathworks.com/help/supportpkg/arduinoio/ref/readdigitalp...

casi 11 años hace | 1

Respondida
Error occurred when evaluating apply callback [Instrument Control Toolbox]
Have you tried using the Arduino Serial Transmit instead of the Instrument Control Toolbox one? I think that will resolve this i...

casi 11 años hace | 0

Respondida
Question about deploying simulink model to Arduino Mega 2560
You should contact Technical Support of MathWorks regarding this, because the Support Package is dependent only on base product ...

casi 11 años hace | 0

Respondida
can i change simulink blocks execution order
Try using the Block Priorities for individual blocks that you think should be executed first - http://www.mathworks.com/help/sim...

casi 11 años hace | 2

Respondida
Arduino support package baud rate
I am not sure which version of the support package you are using, but I am working with 15a and here is a file that might help y...

casi 11 años hace | 0

Respondida
Preventing a Matlab Function from recompiling in Simulink
If you can put your MATLAB function block inside Model reference and use the if any changes detected option mentioned here - htt...

casi 11 años hace | 0

| aceptada

Respondida
can we develop detector ball component model for raspberry ????
You can use MATLAB's trackball.m function as the base on a MATLAB function block and feed the Video Capture block inputs to it a...

casi 11 años hace | 0

Respondida
How can i make Arduino stand alone without powering it via usb & writeDigitalPin() slow response problem
To make arduino stand alone you need to have the Simulink support package installed - http://www.mathworks.com/hardware-support/...

casi 11 años hace | 0

Respondida
Can I upload Arduino Code written in MATLAB using MATLAB Arduino Support Package?
I don't think this is possible using MATLAB support package as the Simulink support package is the one that I most commonly use ...

casi 11 años hace | 0

Respondida
Can't use serial send with arduino uno board
I got the same error when trying to use Serial Send which is from the Instrument Control Toolbox, however it went away when I us...

casi 11 años hace | 0

Respondida
Unable to do Serial Communication between Arduino and Matlab
If you are trying to turn on LEDs using MATLAB on an Arduino board, you can simplify this by downloading the support package fro...

casi 11 años hace | 0

Respondida
How do I create a S-Function with generated Code (Simulink Coder)?
You can create subsystems out of algorithms that are of concern and right click on the subsystem > C/C++ code > generate S-funct...

casi 11 años hace | 1