Respondida
Why does disableI2C() stalls the Raspberry Pi?
This is due to the upstream Linux issue for BCM 2835 based devices. This issue has been reported in following Raspberry Pi forum...

casi 6 años hace | 0

| aceptada

Pregunta

Why does disableI2C() stalls the Raspberry Pi?
I have a Raspberry Pi 3B+ with MathWorks customized Raspbian image for R2020b. When I execute following commands, I see an erro...

casi 6 años hace | 1 respuesta | 0

Enviada

MATLAB Support Package for Parrot Drones
Control Parrot drones from MATLAB and acquire sensor data

alrededor de 6 años hace | 7543 descargas |

Respondida
does it is possible to live stream video in matlab with H.264 codec
Hi Haris, MATLAB will be supporting H.264 encoded RTSP streams for IP Cameras through MATLAB Support Package for IPCameras in t...

alrededor de 6 años hace | 1

Respondida
Read data from Arduino Nano 33 IoT IMU sensor
Hi Matthias, I see that you are using a correct subset of I2C APIs documented to read out the sensor register...

más de 6 años hace | 0

| aceptada

Respondida
Can I connect the VCC and GND pins of the NeoPixel addon directly to the VCC and GND pins of Arduino?
No, as the NeoPixel requires high current which cannot be supplied by the Arduino board. For power supply specifications of Ne...

casi 7 años hace | 1

Pregunta

Can I connect the VCC and GND pins of the NeoPixel addon directly to the VCC and GND pins of Arduino?
Can I connect the VCC and GND pins of the NeoPixel addon directly to the VCC and GND pins of Arduino?

casi 7 años hace | 1 respuesta | 0

Respondida
In the Capacitive Sensor addon, can I use an analog pin on the Arduino board as the ‘sendPin’ or ‘receivePin’?
This depends on the Arduino board. In some boards like the Leonardo, you cannot use an analog pin as a digital pin. To check if ...

casi 7 años hace | 0

Pregunta

In the Capacitive Sensor addon, can I use an analog pin on the Arduino board as the ‘sendPin’ or ‘receivePin’?
In the Capacitive Sensor addon, can I use an analog pin on the Arduino board as the ‘sendPin’ or ‘receivePin’?

casi 7 años hace | 1 respuesta | 0

Respondida
How can I find the state of the SA0 pin and the DeviceType for LSM303 or L3G addons when it cannot be auto detected by MATLAB Arduino support package?
For details on the SA0 pin, see section ‘I2C Communication’ https://www.pololu.com/product/2127. The ‘Device type’ of the de...

casi 7 años hace | 0

| aceptada

Pregunta

How can I find the state of the SA0 pin and the DeviceType for LSM303 or L3G addons when it cannot be auto detected by MATLAB Arduino support package?
How can I find the state of the SA0 pin and the DeviceType for LSM303 or L3G addons when it cannot be auto detected by MATLAB Ar...

casi 7 años hace | 1 respuesta | 0

Enviada

Rubik's Cube® Solver using an Arduino and MATLAB
Solve Rubik’s Cube® using image processing and Arduino-controlled servo motors

alrededor de 10 años hace | 2818 descargas |

Enviada

Creating a Motion Detector using an Arduino, a Photoresistor and MATLAB
Acquire photoresistor measurements and explore motion detection algorithms

alrededor de 10 años hace | 3674 descargas |

Enviada

Wireless control and monitoring of an LED using XBee
Acquire data from wireless sensors using Xbee from MATLAB

más de 12 años hace | 3065 descargas |