Respondida
HDL Coder Workflow Advisor timing analysis
Hi Grégory, You can open Xilinx ISE project from the link generated in HDL Workflow Advisor step 4.1, and change following tw...

más de 9 años hace | 0

| aceptada

Respondida
Is HDL Coder capable of generating configurable code?
Hi Ethan, GENERIC/PARAM is supported by HDL Coder when you use "Generate parameterized HDL code from masked subsystem" featur...

casi 10 años hace | 0

| aceptada

Respondida
Using HDL Coder IP core in Xilinx Vivado instead of EDK
Hi Stefan, Yes, the IP core generation feature for Xilinx Vivado will be supported in MATLAB R2014b release. You can already...

alrededor de 10 años hace | 0

| aceptada

Respondida
unable to load valid reference design plugin
Hi Roger, In HDL Workflow Advisor Step 1.2 "Set Target Interface", In the table "Target platform interface table", do you have o...

más de 10 años hace | 0

| aceptada

Respondida
ZedBoard full Linux for MathWorks HDL Coder
Hi Amir, Ubuntu or any other Linux flavor is not supported by HDL Coder and Embedded Coder support package for Zynq/ZedBoard in...

más de 10 años hace | 0

| aceptada

Respondida
how could i generate an axi-stream or axi4-lite dma master by hdl coder?
Hi Owen, HDL Coder doesn't support AXI4-Lite Master mode yet. The current AXI4-Lite support is for slave mode only. You can u...

más de 10 años hace | 1

Respondida
HDL Stream FFT in HDL Coder 2013b, not support FPGA?
Hi Owen, The HDL Streaming FFT block only support signed fixed-point data type as input. You can try change your input data t...

casi 11 años hace | 0

| aceptada

Respondida
HDL Stream FFT in HDL Coder 2013b, not support AXI4-Stream Interface? (single rate?)
Hi Owen, The HDL Streaming FFT block is not yet supported by AXI4-Stream Video interface in 2013b (because this block uses mu...

casi 11 años hace | 0

Respondida
is it possible to work with Altera Cyclone(EP1C12Q240C8) FPGA kit and Matlab HDL workflow advisor ?
Hi Kingsuk, Both the FPGA-in-the-loop and FPGA Turnkey workflow does not support Altera Cyclone FPGA family. The supported FP...

casi 12 años hace | 0

| aceptada

Respondida
Altera FPGAs
Hi Natalie, Yes, you need a separate Altera FPGA board to prototype Altera Arria II Gx FPGA. Altera FPGA boards are suppor...

alrededor de 12 años hace | 0

| aceptada