Respondida
Solar Still Model using a Phase Change Material.
Cleaning up Answers for Simscape Electrical: moving Yifeng's comments to the answer section so this questions is marked as havin...

más de 4 años hace | 0

Respondida
Change Specialized Power Systems Path after saving a Simulink model from R2021a to R2020b effectively
Hello Stephan, unfortunately there is no supported method for easily backporting specialized power systems models. Your sugges...

más de 4 años hace | 0

| aceptada

Respondida
What is the difference between phasor measurement unit (PMU) blocks in Simulink?
Hello Igor, if you want more specifics on the implementation of the algorithm, much of it is availabling from within Simulink. ...

más de 4 años hace | 0

| aceptada

Respondida
How do I make a model for sensorless BLDC motor control using MATLAB?
Hello Miheer, you should probably also take this onramp (and possibly the simulink one). https://www.mathworks.com/learn/tutor...

más de 4 años hace | 0

Respondida
Induction Machine FOC block
Hello Murtaza, the first thing I would do is use an actual inverter model with diodes parallel to your switches. Also, please ...

más de 4 años hace | 0

Respondida
How to understand/evaluate powericon.p?
Hello Nabil, it can be challenging to just edit a library block like that. You can attempt it using the following functionalit...

más de 4 años hace | 0

Respondida
PMSM controller doesn't work
Hello frank, you don't have your pole pair parameter entered correctly in your machine. Go to where your mechanical parameters...

más de 4 años hace | 0

| aceptada

Respondida
SoC estimation using the equation in attached image
Hello Mustafa, the link to your data set does not work and you did not include the relevant .mat file so it would be particular...

más de 4 años hace | 1

Respondida
How to simulate a fuel cell (specialized power systems) connected to a DC/DC converter in Simulink using simscape blocks?
Hello Diego, you can place a capacitor (on the simscape side) on the input to your dc/dc converter and set its initial voltage ...

más de 4 años hace | 0

Respondida
Modeling a variable RL branch
Hello Paul, the easiest and most accurate approach would be to switch to using simscape core technology (use the blue variable ...

más de 4 años hace | 1

Respondida
Import from 2021a to 2020b unsuccessful for simscape electrical blocks
Hello Priya, unfortunately this is not a bug. Exporting specialized power systems modesl backwards in matlab versions is not s...

más de 4 años hace | 0

| aceptada

Respondida
DC-DC converter Error Initial conditions solve failed to converge.
you need to add an electrical reference to the output of this converter the way it works. (or short the output and input negativ...

más de 4 años hace | 0

Respondida
Is it possible use a battery in Simulink?
Hello Tony, the Rcond warning can be very common when using specialized power systesm. Essentially, the tool generates matrice...

más de 4 años hace | 0

| aceptada

Respondida
BLDCのパラメータについて
You should use the frequency driving the motor at rated speed for measuring those parameters.

más de 4 años hace | 1

Respondida
Problem with machine initialization and wrong steady state voltages in simpower systems
Hello Maha, here is an example that you could download: https://www.mathworks.com/matlabcentral/fileexchange/46067-ieee-14-bus...

más de 4 años hace | 0

Respondida
How to switch SPDT Simscape Electrical Relay Block?
Hello Utkarsha, The way you have it, use a controlled source connected to the widing (control) and apply the correct voltage/cu...

más de 4 años hace | 1

| aceptada

Respondida
How do I plot this square waveform using given equations for a SHM
Hello Yuehan, It looks like the code you shared is an image? Can you share the text. It also looks like you are psasing pi/6 ...

casi 5 años hace | 0

Respondida
simscape electronics simulation extremely slow
This is an effort to answer old unanswered questions on Matlab answers: The signal is rectified, it's just that the capacitor i...

casi 5 años hace | 1

Respondida
How can I capture state space variables for use in control in simpowersystems?
This is part of an effort to clean up old unanswered questions: Please use the linear system analyzer in the power gui tool. Y...

casi 5 años hace | 0

Respondida
Shape of masked subsystems in Simulink and having ports at different directions
Simulink and simscape blocks can now support ports on all four sides, but you cannot create arbitrary shapes.

casi 5 años hace | 0

Respondida
How can I implement a BJT in SimPowerSystems?
This is part of an effort to clean up old unanswered questions: For BJT's, these should be modelled in simscape as specialized ...

casi 5 años hace | 0

Respondida
How to connect simpower circuit with simscape variable resistor
This is unfortunately too late, but Sps has a block for this now: https://www.mathworks.com/help/physmod/sps/powersys/ref/varia...

casi 5 años hace | 0

Respondida
Mismatch between theoretical equation and simulink simulation
I'm just moving your comment to the answer section so this question shows up as having an answer: From Joaquin's comments above...

casi 5 años hace | 0

Respondida
Frequency-Dependant Voltage Source
Hello Sven, you can either create it yourself as shown below, or use the programable voltage soucre in simscape electrical. It...

casi 5 años hace | 0

Respondida
Simscap Scope shows wrong data.
Hello Muhammad, this issue is likely not the scope, but the simulation results. The easiest explanaion of why the results don'...

casi 5 años hace | 0

| aceptada

Respondida
Doubt related to Simulink
Hello Ankit, please use the matlab function block instead, and see the documentation here for how to program it: https://www.ma...

casi 5 años hace | 0

Respondida
How do I combine a Battery and a MMC in a Power System using Simulink?
Hello Emmanuel, you should start with existing exaples and work from there. Here is one for an MMC: https://www.mathworks.com/...

casi 5 años hace | 1

Respondida
How do you observe/view the SOC of a Battery (table-based) in Simulink/Simscape?
Hello Muhammad, you can right click the block, got to the simscape menu, and select the instrumented version to get those outp...

casi 5 años hace | 0

Respondida
How to set up a Battery Cooling Plate for a Generic Battery Model?
Hello Claud, you can represent a cold plate as a thermal mass with the appropriate conduction (or thermal resistivity) connecti...

casi 5 años hace | 1

Respondida
I want to use a comparator to compare a sine wave and a triangle wave in simscape. I can't get the components to connect.
Unfortunately, the ps signal blocks don't work with those connection labels. Instead, you can make the switches take in electri...

casi 5 años hace | 0

| aceptada