Respondida
MIMO ltiblock.pid
This is a bug in the documentation. ltiblock.pid is for representing SISO PIDs only. The bug will be fixed in the future release...

casi 10 años hace | 0

Respondida
whether matlab function block and trigger block can be linearized?
Hi, Triggered subsystems are discontinuous and would typically not linearize.For cases when exact linearization does not work, ...

casi 10 años hace | 1

| aceptada

Respondida
on which method pidtool command selects parameters of PID?
Please see <http://www.mathworks.com/matlabcentral/answers/64274-how-does-the-simulink-pid-autotuner-work here>

alrededor de 10 años hace | 0

Respondida
Why the build-in step function and the user defined m-file generate different results
The difference is due to how the derivative term is handled in the simulation. When you use ode45 (the first approach in the que...

alrededor de 10 años hace | 1

Respondida
design optimization Simulink model parameter estimation to fit measured curvedata
Please start by taking a look at <http://www.mathworks.com/videos/estimating-dc-motor-parameters-97057.html the video> and readi...

alrededor de 10 años hace | 1

Respondida
Updates of Matlab toolboxes based on latest Academic Research findings (Sys Id Toolbox)
Hi, As pointed out in the previous answer, each release we publish information about new features added to each of our products...

alrededor de 10 años hace | 0

Respondida
How to do stability analysis of a MIMO simulink model?
You can use Linear Analysis tool in Simulink Control Design to compute a transfer function of a model (linearize the model). Tak...

alrededor de 10 años hace | 0

Respondida
How do I tune all the 4 PI controllers of a STATCOM?
You can try using <http://www.mathworks.com/help/robust/tuning-with-control-system-tuner-app.html Control System Tuner> which ca...

alrededor de 10 años hace | 1

| aceptada

Respondida
I want to know the region of PID tuner
The PID Tuner considers as the plant all blocks in the loop between the PID Controller block output and input. See <http://w...

alrededor de 10 años hace | 0

Respondida
How to tune PID using PID tuner app if output data are n
Can you try resampling your data at one sample rate?

alrededor de 10 años hace | 0

Respondida
How can i exract transfer fuction of my nonlinear real system?
Can you "break" the control system and put some test signals through your motor - steps, chirps, sine waves, etc? If you can ...

alrededor de 10 años hace | 0

Respondida
Linearization error in PID controller block
Please do not post the same question multiple times. Also, can you be more specific about the error you are getting. hard to hel...

alrededor de 10 años hace | 0

Respondida
How would you design a PID controller to stabilize a 4th order system?
Some plants just cannot be controlled with a PID controller. In that case you need to look at other types of control. You can ...

alrededor de 10 años hace | 0

Respondida
Auto tuning PID algorithm in Simulink
See the doc <http://www.mathworks.com/help/slcontrol/ug/pid-tuning-algorithm.html here> .

más de 10 años hace | 0

| aceptada

Respondida
transfer function=1/2s^3+3s^2+s,draw the nyquist plot .i have not get the same plot which i have studied.
In your plot the half circle (from -0 to +0) has infinite magnitude, because your system has a pole at zero. nyquist plot cre...

más de 10 años hace | 1

Resuelto

Produce a cosine wave
Produce the following signal: <<http://blogs.mathworks.com/images/seth/cody/cosine-eqn.png>>

más de 10 años hace

Respondida
How do I get the DC motor model to match real world
You can try using Simulink Design Optimization to automatically estimate model parameters to match both measured voltage and cur...

más de 10 años hace | 0

Respondida
transfer function=1/2s^3+3s^2+s,draw the nyquist plot .i have not get the same plot which i have studied.
Can you attach the plot you expected to see?

más de 10 años hace | 0

Respondida
Is it possible to interface flightgear 3.4 with matlab 2013a
Support for interfacing with FlightGear 3.4 was added in 15b, so that's why you are seeing issues in 13a.

más de 10 años hace | 0

Respondida
System Identification tool "OE, tfest" question
<http://www.diva-portal.org/smash/get/diva2:316884/FULLTEXT01.pdf This paper by Lennart Ljung> might be helpful.It pretty much a...

más de 10 años hace | 0

| aceptada

Respondida
Neural Network Predictive Controller Design without the plant model but with historical data.
This is applicable to all control design problems in general: if you have plant input-output data and want to create a plant mod...

más de 10 años hace | 0

Respondida
Simulink PID controller apparently doing nothing
I cannot reproduce this behavior. When I run your setup, I definitely see closed-loop response getting to 1 in steady-state. May...

más de 10 años hace | 0

Respondida
Why is the error of the close loop PID max of 1? File is provided.. please help
The max error is always one because at time 0, when you command the reference to step from 0 to 1, your plant model is initializ...

más de 10 años hace | 0

| aceptada

Respondida
how to apply a pwm signal to dc servo motor using pid controller?
<http://www.mathworks.com/discovery/pulse-width-modulation.html This page with resources on pwm> should be helpful. It includes ...

más de 10 años hace | 0

Respondida
Transfert function with System identification toolbox
There are a few issues here. 1. Your data (Amp, Pha) does not agree with closed form transfer function at low frequencies, be...

más de 10 años hace | 1

Respondida
Using the Recursive Polynomial Model Estimator for online estimation
I don't think you can expect to get the exact a,b,c,d matrices you start from. The model is estimating system dynamics, and ther...

más de 10 años hace | 0

Respondida
Representing controller in z-domain and plant in continuous domain
Simulink model should not be creating any errors if you are combining continuous and discrete blocks. Here is a model with a si...

más de 10 años hace | 1

Pregunta

What is Missing from Fuzzy Logic Toolbox?
What should MathWorks add to Fuzzy Logic Toolbox? What features would be useful to you?

más de 10 años hace | 1 respuesta | 2

1

respuesta

Respondida
Why cant i tune this simple electrical system? "The plant model in the PID loop linearizes to zero" Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!
See <http://www.mathworks.com/help/slcontrol/ug/troubleshooting-automatic-pid-tuning.html#btt7pgj here> .

más de 10 años hace | 0

| aceptada

Respondida
how to write a matlab coding for position and velocity algorithm for a digital pid controller
http://www.mathworks.com/matlabcentral/answers/6200-tutorial-how-to-ask-a-question-on-answers-and-get-a-fast-answer

más de 10 años hace | 0