Respondida
Embedded coder: Code generation data types
This can be accomplished by picking a 64 bit custom processor on the Hardware tab. See attached model.

más de 1 año hace | 0

| aceptada

Respondida
Why no output file from standalone Simulink Coder executable?
When running a .exe created from Simulink, there is no such thing as a "workspace" for the code to write to. You need to use a ...

más de 1 año hace | 0

Respondida
why i am recieve this error message when i am trying to generate the code ?
DId you follow the recommendations and either move to a directory without spaces or switch to a different compiler?

más de 1 año hace | 0

Respondida
Utilize simulink generated code
You could try Simulink Compiler. https://www.mathworks.com/products/simulink-compiler.html

más de 1 año hace | 0

Respondida
Can i burn a C code on ARM boards in simulink?
Yes, this can be done with the one of the ARM support packages. https://www.mathworks.com/hardware-support/arm.html?s_tid=srcht...

más de 1 año hace | 0

Respondida
How to compile C2000 driverlib calls into an S function
S-Function builder assumes that you want to use the external C code for both Simulink simulation and code generation. For simula...

más de 1 año hace | 0

Respondida
Simulink DDS Blockset: problem with sequence <string> in topic
Sequences ( i.e. variable length vectors) are not currently supported by the DDS Blockset for any Simulink data type. In addit...

más de 1 año hace | 1

| aceptada

Respondida
LibSystemOutputCustomCode() return function inlining error
This block should allow you to insert code into the step() function: https://www.mathworks.com/help/ecoder/ref/systemupdate.html...

más de 1 año hace | 0

Respondida
How to create a .dll from a .slx?
Do you get any error messages? Make sure you don't have the "generate code only" box checked. Thanks. Mark.

más de 1 año hace | 0

Respondida
Overwriting default mex compiler flags via Simulink C-Caller block
One approach you could try is to compile your external C++14 code into it's own library outside of MATLAB/Simulink using g++ wit...

más de 1 año hace | 0

Respondida
MATLAB Coder - generate code but build separately?
The con for this approach is that you may have to adjust your build process if the names of .c or .h files change due to changes...

más de 1 año hace | 0

| aceptada

Respondida
wANTED TO GENERATE C CODE OF SIMULINK
This looks like a code generation error for the GPIO block. I recommend sending Simulink model and error message to support@mat...

casi 2 años hace | 0

Respondida
Best way to wrap C++ library to be used in MATLAB, Simulink, and others?
For both Simulink and MATLAB, it is easiest to first compile your C++ code into a library, then use the following approaches for...

casi 2 años hace | 1

| aceptada

Respondida
Warning: Name is nonexistent or not a directory in code generation
Did you enter info in the "Include Headers", "Include directories" and "Source Files" sections of the custom code dialog? In Th...

casi 2 años hace | 1

Respondida
SIL testing with user defined function.
You need to add the function prototype for _mm_loadu_pd to your user defined C file ( or a #include to a header file that define...

casi 2 años hace | 0

Respondida
Simulink Switch Block Input Calculation
Embedded coder attempts to pull upstream calculations inside the if-then C++ code generated for a switch block. However, to ens...

casi 2 años hace | 0

| aceptada

Respondida
Define global variables for MATLAB function usage within Simulink for Embedded Code
Did you follow the steps as described here? https://www.mathworks.com/help/simulink/ug/using-global-data-with-the-matlab-functi...

casi 2 años hace | 0

Respondida
How can I avoid function duplication in code generation？
You need to move your code from the Start() TLC function to the BlockTypeSetup() TLC function. The BlockTypeSetup() TLC functio...

casi 2 años hace | 0

Respondida
I have generated C code using embedded coder but few files are missing in the folder e.g. math.h
Use the "Package code and artifacts" configuration open to run the PackNGo tool that will identify all needed source and header ...

casi 2 años hace | 0

Respondida
How to open matlab project (.proj) in the background using -batch command from bash?
use openProject() function to do this. https://www.mathworks.com/help/matlab/ref/openproject.html

casi 2 años hace | 0

Respondida
simulink unable to pace at specified rate
Accelerator and rapid accelerator modes can be used to increase the simulation speed, but these options are not likely to get yo...

casi 2 años hace | 1

Respondida
Run Simulink R2014b model in R2022b version
Theoretically you can open a model from an older release and it should open and run. The upgrade advisor https://www.mathworks....

casi 2 años hace | 0

Respondida
Share a state variable between 2 masked S-Function
It is not possible to have an S-Function update the value of data dictionary value. See this link for approaches you can take...

casi 2 años hace | 0

| aceptada

Respondida
How to return array from imported C++ code in C function block in Simulink?
Why is your C++ code deailing with mxarray? The whole point of the C Function block is that behind the scenes it will generate ...

casi 2 años hace | 0

Respondida
How to find enumeration usage in simulink model
I believe the dependency analysis feature of SImulink Projects will do this for you. You will first have to set up a Simulink P...

alrededor de 2 años hace | 0

| aceptada

Respondida
How to connect Raspberry Pi to DAC MCP 4921 using SPI Simulink blocks?
Would you want to use the SPI Read/Write/Master blocks to communicate with this external device, similar to this example that us...

alrededor de 2 años hace | 1

Respondida
TI C2000 F28379D support package: Mathworks implementation of IPC and how to interface with hand-code ?
Rather than trying to write the IPC code for your hand-written application, a better approach might be to creaet a Simuilnk mode...

alrededor de 2 años hace | 0

Respondida
Converting Aerospace blockset's Gyro model to a C code with Simulink Coder
Integrating generated code from a Simulink model into another application is fairly simple. When you generate code for your sim...

alrededor de 2 años hace | 1

Respondida
Cant use variable size of bus member vector Simulink
It is not possible to change the length of a fixed length bus element. One approach to work around this would be to create a ne...

alrededor de 2 años hace | 0

| aceptada

Respondida
Embedded Coder: function to receive decoded Macro
After code is generated, you can load the file buildinfo.mat. This data object contains names of all generated source and heade...

alrededor de 2 años hace | 0