From the series: How a Differential Equation Becomes a Robot
Carlos Osorio, MathWorks
In Part 5 of this five-part webinar series we show how to automatically generate C-code from your Simulink models, and how to interface with real-time hardware and perform typical rapid prototyping tasks.
About the presenter: Carlos Osorio received a B.S. from the Pontificia Universidad Catolica del Peru and an M.S. from the University of California at Berkeley, both in Mechanical Engineering. He specializes in Automatic Control Systems and Vehicle Dynamics. Before joining The MathWorks in October of 2007, he worked in the automotive industry in the Advanced Chassis Technology Department at Visteon Corporation, where he was involved in the development and implementation of prototype electronic active and semi-active suspensions, steer-by-wire and brake-by-wire systems for passenger vehicles.
Recorded: 11 May 2012
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .Select web site
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.