Diagnostics
R2026bDiagnostics to improve link quality and performance.
Topics
- Detect Underruns and Overruns
To detect underruns and overruns, use the lost sample indicator.
- Change Transport Data Rate
Set the transport data rate in blocks or System objects.
Featured Examples
Frequency Offset Calibration Receiver with USRP Hardware
Use USRP™ System objects to measure and calibrate transmitter/receiver frequency offset at the receiver.
Frequency Offset Calibration Transmitter with USRP Hardware
Use USRP System objects to measure and calibrate transmitter/receiver frequency offset at the transmitter.
Frequency Offset Calibration with USRP Hardware in Simulink
These two models show how to determine the relative frequency offset between two USRP™.
Spectrum Analysis of Signals
Perform spectral analysis of signals using either recorded data or real-time reception with RTL-SDR, ADALM-PLUTO, or USRP radios, tuning to specific bands and utilizing a spectrum analyzer for viewing and measurements.
Spectrum Analysis of Signals in Simulink
Perform spectral analysis of signals using either recorded data or real-time reception with RTL-SDR, ADALM-PLUTO, or USRP radios, tuning to specific bands and utilizing a spectrum analyzer for viewing and measurements.
Spectrum Monitoring Using Software-Defined Radios
Perform wideband spectrum monitoring by rapidly tuning the center frequency of USRP B2xx radio and sweeping the entire band in chunks.
