Model Configuration Parameters

Update the configuration parameters for a Simulink^® model that you create, before simulating or deploying the model to the controller.

In the Simulink window, click Hardware Settings in the HARDWARE tab to open the Configuration Parameters dialog box and select the target hardware in the Hardware board field. You can also press Ctrl+E to open the Configuration Parameters dialog box.

Hardware Implementation Pane Overview

Configure hardware board to run Simulink models.

1. In the Simulink Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameter dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to Infineon AURIX TC3x.

4. The parameter values under Hardware board settings are automatically populated to their default values.

   You can optionally adjust these parameters for your particular use case.

5. To apply the changes, click Apply.

Design Mapping

The Hardware Mapping tool allows you to configure the software tasks and peripherals on the selected hardware board.

• In this tool, you can map the tasks in your software model to the available event sources and interrupts. The sources of events or interrupts depend on the choice of hardware board and peripherals available in the model.

• In this tool, you can configure the peripheral by setting hardware specific parameters. The available parameters depend on the selected hardware board for the model and the peripheral.

For more information, see .

Target hardware resources

Device

Parameter	Description	Default Value
Series	Displays the device series for the selected hardware board.	TC37x
Step	Displays the device step for the selected hardware board.	A
Package type	Displays the device packaging type for the selected hardware.	LQFP
Package class	Displays the number of programmable pins for the selected hardware board/microcontrollers.	176

Build Options

Parameter	Description	Default Value
Build action	Define how Embedded Coder® responds when you build your model.	Build, load, and run
Disable parallel build	Select to compile the generated code and driver source codes in parallel order for faster build and deployment speed.	off
Enable force rebuild of static library	Select to force rebuild of the static driver library.	off
Enable program cache #	Select the program cache.	on
Enable data cache #	Select the data cache.	off

Clocking

Parameter	Description	Default Value
External oscillator (MHz)	Oscillator frequency used in the processor.	20
CPU Clock (MHz)	CPU clock frequency of the microcontrollers on the target hardware	300

Connectivity

Parameter	Description	Default Value
Connectivity interface	Select the type of communication interface for simulation.	Serial (ASCLIN0)
Port	Select the serial communication interface module.	empty
Baud rate	Select the baud rate of the serial communication port.	921600

External mode

Parameter	Description	Default Value
Communication interface	Select the transport layer External mode uses to exchange data between the host computer and the target hardware	Serial
Verbose	Select Verbose to view the External mode execution progress and updates.	off