Signal Monitoring and Parameter Tuning
R2026bMonitor signals and tune parameters on Renesas RH850 microcontrollers by using external-mode communication between the host and the target. Deploy your Simulink® model as generated C code and stream signal data in real time while adjusting parameters without regenerating code.
You can generate optimized code for Renesas RH850 microcontrollers and perform real-time signal monitoring, parameter tuning, and processor-in-the-loop (PIL) testing with Embedded Coder.
Topics
- Configuration for Monitor & Tune and PIL for Renesas RH850 Microcontrollers
Monitor signals, tune parameters, and validate generated code on Renesas RH850 microcontrollers using External mode and processor-in-the-loop (PIL) workflows.
Featured Examples
Test Generated Code with PIL Simulations on Renesas RH850 Microcontrollers
Use the Embedded Coder ® Support Package for Renesas® RH850 Microcontrollers to generate code from Simulink models and perform Processor-in-the-Loop (PIL) simulations on the Renesas RH850 U2A board. You can leverage both the SIL/PIL Manager and command-line workflows for this process. PIL verification is a critical step to ensure that the generated code, when executed on actual hardware, replicates the behavior of your original Simulink design. For more details, see Choose a SIL or PIL Approach and SIL/PIL Manager.
Code Verification and Profiling Using PIL Testing on Renesas RH850 Microcontrollers
Use the Embedded Coder ® Support Package for Renesas® RH850 Microcontrollers to perform Processor-in-the-Loop (PIL) profiling on the Renesas RH850 U2A16 Starter Kit. In PIL simulation, the control algorithm executes on the target hardware while the plant model runs on the host machine. This configuration enables you to measure and compare execution times, as well as verify numerical equivalence between simulation and hardware implementations.
