Setup and Configuration

Install hardware support package, update firmware, and configure hardware connection

The setup and configuration process includes install of the Embedded Coder^® Support Package for Infineon^® AURIX™ TC4x Microcontrollers software and install of the third-party software such as Infineon Low Level Driver (iLLD), TASKING Smartcode, Green Hills^® MULTI^®, and Synopsys^® Virtual Prototyping (VP) to support Infineon AURIX TC4x - TriBoards.

With this software installed, you can set up your model to use the support package and set up communications with your target hardware or Virtual Prototyping (VP).

Functions

codertarget.aurix_target.setiLLDPrecompiledFolder() Set folder path to store precompiled iLLD library (Since R2022b)

Topics

Install Embedded Coder Support Package for Infineon AURIX TC4x Microcontrollers
Install the Embedded Coder Support Package for Infineon AURIX TC4x Microcontrollers.
Launch Hardware Setup
Hardware boards and devices supported by MathWorks^® require additional configuration and setup procedure to connect to MATLAB^® and Simulink^®.
What to Do After Installation
Area to explore and experiment after installation of the Embedded Coder Support Package for Infineon AURIX TC4x Microcontrollers.
Supported Hardware and Required Software
Hardware and software required when using Embedded Coder Support Package for Infineon AURIX TC4x Microcontrollers.
Change iLLD Version
Change Infineon low level driver (iLLD) version.