Acceptance Mask 1
Acceptance mask value for filter 1
Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Groups / CAN
Description
The
Acceptance Mask 1 parameter specifies the acceptance mask value for
filter 1. If you set the mask bit to 0, the block accepts the corresponding
message ID bit regardless of the value you set in the Acceptance Filter 1 parameter. If you
set the mask bit to 1, the block compares the corresponding message ID bit
with the value of the Acceptance Filter 1 parameter. The block accepts the frame if the values
match, otherwise it rejects the frame.
Settings
0 (default) |
1If you set the mask bit to 0,
the block accepts the corresponding message ID bit regardless of the value you set in the
Acceptance Filter 1 parameter. If you set the mask bit to 1, the block
compares the corresponding message ID bit with the value of the Acceptance Filter 1 parameter.
The block accepts the frame if the values match, otherwise it rejects the frame.
Recommended Settings
No recommendation.
Programmatic Use
| No programmatic use is available. |
Version History
Introduced in R2019b
