Series R
Model series resistor
Libraries:
RF Blockset /
Equivalent Baseband /
Series /
Shunt RLC
Description
The Series R block models the series resistor described in the block dialog box, in terms of its frequency-dependent S-parameters.
The series R object is a two-port network, as shown in the following circuit diagram.
Parameters
Main
Resistance value, specified as a scalar.
Visualization
Frequency data source, specified as
User-specified
.
Frequency data range, specified as a vector in hertz.
Reference impedance, specified as a nonnegative scalar in ohms.
Type of data plot to visualize using the given data, specified as one of the following:
X-Y plane
— Generate a Cartesian plot of the data versus frequency. To create linear, semilog, or log-log plots, set the Y-axis scale and X-axis scale accordingly.Composite data
— Plot the composite data. For more information, see Create Plots Using Equivalent Baseband Library Blocks.Polar plane
— Generate a polar plot of the data. The block plots only the range of data corresponding to the specified frequencies.Z smith chart
,Y smith chart
, andZY smith chart
— Generate a Smith® chart. The block plots only the range of data corresponding to the specified frequencies.
Type of parameters to plot based on the Plot type you set, specified as one of the following.
Plot type | Y parameter1 |
---|---|
X-Y plane | S11 , S12 , S21 , S22 , GroupDelay , OIP3 , NF , NFactor , and NTemp . |
Composite data | No Y parameter1 to set. |
Polar plane | S11 , S12 , S21 , and S22 |
Z Smith chart | S11 and S22 . |
Y Smith chart | S11 and S22 . |
ZY smith chart | S11 and S22 . |
Type of parameters to plot based on the Plot type you set, specified as one of the following.
Plot type | Y parameter2 |
---|---|
X-Y plane | S11 , S12 , S21 , S22 , GroupDelay , OIP3 , NF , NFactor , and NTemp . |
Composite data | No Y parameter2 to set. |
Polar plane | S11 , S12 , S21 , and S22 |
Z Smith chart | S11 and S22 . |
Y Smith chart | S11 and S22 . |
ZY smith chart | S11 and S22 . |
Plot format, specified as one of the following.
Y parameter1 | Y format1 |
---|---|
S11 , S12 , S21 , and S22 . | Magnitude (decibels) , Magnitude (linear) , Angle(degrees) , Angle(radians) , Real , and Imaginary . |
GroupDelay | ns , us , ms , s , and ps . |
OIP3 | dB , dBm , W , and mW . |
NF | Magnitude (decibels) |
NFactor | None |
NTemp | Kelvin |
Dependencies
To enable Y format1, set Plot type to X-Y plane
.
Plot format, specified as one of the following.
Y parameter2 | Y format2 |
---|---|
S11 , S12 , S21 , and S22 . | Magnitude (decibels) , Magnitude (linear) , Angle(degrees) , Angle(radians) , Real , and Imaginary . |
GroupDelay | ns , us , ms , s , and ps . |
OIP3 | dB , dBm , W , and mW . |
NF | Magnitude (decibels) |
NFactor | None |
NTemp | Kelvin |
Dependencies
To enable Y format2, set Plot type to X-Y plane
.
Frequency plot, specified as Freq
.
Frequency plot format, specified as one of the following.
Auto | Hz | kHz | MHz |
GHz | THz |
Y-axis scale, specified as Linear
or Log
.
Dependencies
To enable this parameter, set Plot type to X-Y
plane
.
X-axis scale, specified as Linear
or Log
.
Dependencies
To enable this parameter, set Plot type to X-Y
plane
.
Plot the specified data using the plot button.
Version History
Introduced before R2006a
See Also
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
Seleccione un país/idioma
Seleccione un país/idioma para obtener contenido traducido, si está disponible, y ver eventos y ofertas de productos y servicios locales. Según su ubicación geográfica, recomendamos que seleccione: .
También puede seleccionar uno de estos países/idiomas:
Cómo obtener el mejor rendimiento
Seleccione China (en idioma chino o inglés) para obtener el mejor rendimiento. Los sitios web de otros países no están optimizados para ser accedidos desde su ubicación geográfica.
América
- América Latina (Español)
- Canada (English)
- United States (English)
Europa
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)