Troubleshoot Simscape Run-Time Parameter Issues
R2026bBelow, you can find the solutions to some common issues you may encounter while getting started with run-time parameters.
Simscape Run-Time Parameter Setting Not Visible
If a Simscape™ parameter is run-time configurable, its
Configurability drop-down will show either
Compile-time or Run-time.
If the Configurability setting is not visible, then the
parameter is strictly compile-time configurable. For a detailed explanation of how
to enable run-time parameters, see Specify Simscape Run-Time Parameters.
Simulation Does Not Respond to Simscape Run-Time Parameter Change
If you use an expression to define a variable for a Simscape run-time parameter, you might need to recompile the model. When Simulink® Coder™ encounters an unsupported expression, it only codes the current numerical value, and you will see a warning. For information on the limitations for using expressions for run-time configurable parameters, see Limitations for Block Parameter Tunability in Generated Code (Simulink Coder).
If you change the value of a Simscape run-time parameter during a simulation, the change takes effect the
next time you run the simulation unless you use a Reinitialize
Function block or the reset option of an
Enabled Subsystem block to apply the
change during the current simulation. To see how to change the value of a
Simscape run-time parameter, see Specify and Change a Simscape Run-Time Parameter and Change Parameter Values on Target Hardware.
