Number of bits: pointer

R2026b

Pointer bit length for selected hardware

Model Configuration Pane: Hardware Implementation

Description

The Number of bits: pointer parameter describes the bit length of pointer data for the selected hardware.

Dependencies

This parameter is enabled only if you can modify it for the selected hardware.

Settings

64 (default) | 8 | 16 | 24 | 32 | 40 | 48 | 56

Selecting a device by using the Device vendor and Device type parameters sets a device-specific value for this parameter.

The value must be a multiple of 8 between 8 and 64, inclusive.

Recommended Settings

Application	Setting
Debugging	No impact
Traceability	No impact
Efficiency	No impact
Safety precaution	No recommendation for simulation without code generation. For simulation with code generation, select your Device vendor and Device type if they are available in the drop-down list. If your Device vendor and Device type are not available, set device-specific values by using Custom Processor.

Programmatic Use

Parameter: ProdBitPerPointer

Type: integer

Value: 8 | 16 | 24 | 32 | 40 | 48 | 56 | 64

Default: 64

Version History

Introduced in R2006b