Main Content

viewMeasurementLists

View configured measurement lists on XCP channel

collapse all in page

Syntax

viewMeasurementLists(xcpch)

Description

example

viewMeasurementLists(xcpch) shows you all configured measurement list sets for this XCP channel.

Examples

collapse all

Create an XCP channel and configure a data acquisition measurement list, then view the configured measurement list.

Create an object to parse an A2L file and connect that to an XCP channel.

a2lfile = xcpA2L('XCPSIM.a2l')
xcpch = xcpChannel(a2lfile, 'CAN', 'Vector', 'Virtual 1', 1)
xcpch = 

  Channel with properties:

              ServerName: 'CPP'
             A2LFileName: 'XCPSIM.a2l'
          TransportLayer: 'CAN'
    TransportLayerDevice: [1x1 struct]
      SeedKeyCallbackFcn: []
                KeyValue: []

Connect the channel to the server module.

connect(xcpch)

Set up a data acquisition measurement list with the '10 ms' event and 'PMW' measurement.

createMeasurementList(xcpch,'DAQ','10 ms', {'BitSlice0','PWMFiltered','Triangle'});

Create another measurement list with the '100ms' event and 'PWMFiltered'and 'Triangle' measurements.

createMeasurementList(xcpch,'DAQ','100ms', {'PWMFiltered','Triangle'});

View details of the measurement list.

viewMeasurementLists(xcpch)
DAQ List #1 using the "10 ms" event @ 0.010000 seconds and the following measurements:
   PMW

DAQ List #2 using the "100ms" event @ 0.100000 seconds and the following measurements:
   PWMFiltered
   Triangle

Input Arguments

collapse all

XCP channel, specified as an XCP channel object created using xcpChannel. The XCP channel object can then communicate with the specified server module defined by the A2L file.

Version History

Introduced in R2013a

See Also

|