802.11p/n/ac/ah

Perform high-throughput (HT), non-HT, very high-throughout (VHT), and sub-1-gigahertz (S1G) link-level simulations

The examples featured here show how to model end-to-end communication links using the IEEE^® 802.11p™, 802.11n™, 802.11ac™, and 802.11ah™ standards.

Topics

SNR Definition in End-to-End Simulations
Learn how WLAN Toolbox™ software defines the signal-to-noise ratio (SNR) in end-to-end simulations that use AWGN.

Measure the PER of an IEEE 802.11p link by using an end-to-end simulation with a V2V fading channel with AWGN.

Measure the packet error rate of an IEEE 802.11ah link by using an end-to-end simulation with a TGah channel.

Measure the packet error rate of an IEEE 802.11ac link by using an end-to-end simulation with a TGac channel.

Measure the packet error rate of an IEEE 802.11n link by using an end-to-end simulation with a TGn channel.

Simulate an IEEE 802.11n link in Simulink^®.

Maximize IEEE 802.11™ link throughput in time-varying channels by using dynamic rate control.