Why can't my target computer find any accessbile disk drive?
4 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Hi,
I have a problem to enable data logging for my Simulink Real-Time model. At startup, the target computer shows the error: no accessible disk found. It has a SATA drive with 5 partitions, of which 2 are of FAT32 format. The error message only appears once. What is the reason that the partitions are not being recognised?
I can add that I'm using an RS-232 connection and booting from a USB drive (Secondary IDE and Graphics mode enabled). Maybe it's also useful to say that the disk driver makes the hard disk appear as SCSI (under Windows).
Thanks in advance
0 comentarios
Respuestas (2)
Sandip Kumar
el 29 de Oct. de 2014
This will occur if the Simulink Real-Time kernel cannot detect the partition created by a third part program. The documentation provides an example of how to format and partition a disk for use as a hard drive on the Simulink Real-Time target machine:
Thanks, Sandip
3 comentarios
Timothy
el 10 de Sept. de 2021
I know that this post is very old, but just in case it helps anyone...
If the drive appears as SCSI in Windows, its likely a RAID controller and the Target OS doesn't have a diver for it. If you access the BIOS settings at boot-up look for any options mentioning RAID and try to disable them, on some motherboards this may also mean that you need to use a different SATA port for the drive so keep that in mind while troubleshooting.
0 comentarios
Ver también
Categorías
Más información sobre Model Statistics en Help Center y File Exchange.
Productos
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!