Generating two signals and concatenating them

1 view (last 30 days)
I've got this code that is supposed to concatenate 2 singals, the problem is that i dont know what time i should put for the program to look how it is supposed to look.
ts=12000;
t=0:1/12000:159/12000;
A1=0.4;
A2=0.3;
f1=100;
f2=330;
x1=A1*sin(2*pi*f1*t);
x2=A2*sin(2*pi*f2*t);
s=[x1,x2,x1,x1,x2,x2,x1,x2];
plot(s);
It is supposed to look like this
But instead it looks like this, how should i swap the code.
The exercise sounds like: Generate a useful modulated signal corresponding to a bit string 01001101 in this way following: - for bit 0: a sinusoidal component of amplitude of 0.4V, frequency of 100Hz - for bit 1: a sinusoidal component of amplitude of 0.3V, frequency of 330Hz Each bit has a duration of 20ms without pause between bits (total signal duration is 160 ms). A sampling frequency of 12kHz is used.

Accepted Answer

Geoff Hayes
Geoff Hayes on 4 Apr 2022
@Peter Cristian - why are you using
159/12000
? Wouldn't that correspond to
159/12000 = 0.1325 seconds
when you should have 0.02 seconds instead which corresponds to the 20 ms duration for each bit. I think you might have been confusing the 160 ms duration for the total signal with the 20 ms required for each bit (though I think using 159 in this manner is still incorrect).
  7 Comments
Peter Cristian
Peter Cristian on 4 Apr 2022
Ok, i got it now, thanks for your explanations, you have helped me a lot.

Sign in to comment.

More Answers (0)

Tags

Products


Release

R2021b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by