# Plot of three coupled oscillator.

2 visualizaciones (últimos 30 días)
Haya Ali el 19 de Dic. de 2022
Comentada: Haya Ali el 20 de Dic. de 2022
I am trying to built three coupled oscillator just as two coupled oscillator but i don't know what mistake I am doing. Please help me. The code for both the cases are given below
%%Two coupled
clear all; close all; clc;
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Simulation %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%value of constants
a1=0.1;a2=0.2;
omega1=5;omega2=4;
G=0.01;C12=0.001;C21=0.002;
dt=0.01; %step size
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
x1(1)=0.5;
y1(1)=0.5;
x2(1)=0.5;
y2(1)=0.5;
for i=2:1000
x1(i)=x1(i-1)+((a1-x1(i-1)^2-y1(i-1)^2)*x1(i-1)-omega1*y1(i-1)+G*C12*(x2(i-1)-x1(i-1)))*dt;
y1(i)=y1(i-1)+((a1-x1(i-1)^2-y1(i-1)^2)*y1(i-1)+omega1*x1(i-1)+G*C12*(y2(i-1)-y1(i-1)))*dt;
x2(i)=x2(i-1)+((a2-x2(i-1)^2-y2(i-1)^2)*x2(i-1)-omega2*y2(i-1)+G*C21*(x1(i-1)-x2(i-1)))*dt;
y2(i)=y2(i-1)+((a2-x2(i-1)^2-y2(i-1)^2)*y2(i-1)+omega2*x2(i-1)+G*C21*(y1(i-1)-y2(i-1)))*dt;
end
figure
hold on
plot(x1,'r')
plot(x2,'g')
%% Three Coupled
close all; clear all; clc;
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Simulation %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%value of constants
a1=0.1;a2=0.2;a3=0.5;
omega1=5;omega2=4;omega3=3;
G=0.01;C12=0.001;C13=0.006;
C21=0.003;C23=0.005;
C31=0.002;C32=0.004;
dt=0.01; %step size
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
x1(1)=0.5;
y1(1)=0.5;
x2(1)=1;
y2(1)=1;
x3(1)=1.5;
y3(1)=1.5;
for i=2:2000
x1(i)=x1(i-1)+((a1-x1(i-1)^2-y1(i-1)^2)*x1(i-1)-omega1*y1(i-1)+G*C12*(x2(i-1)-x1(i-1)))+G*C13*(x3(i-1)-x1(i-1))*dt;
y1(i)=y1(i-1)+((a1-x1(i-1)^2-y1(i-1)^2)*y1(i-1)+omega1*x1(i-1)+G*C12*(y2(i-1)-y1(i-1)))+G*C13*(y3(i-1)-y1(i-1))*dt;
x2(i)=x2(i-1)+((a2-x2(i-1)^2-y2(i-1)^2)*x2(i-1)-omega2*y2(i-1)+G*C21*(x1(i-1)-x2(i-1)))+G*C23*(x3(i-1)-x2(i-1))*dt;
y2(i)=y2(i-1)+((a2-x2(i-1)^2-y2(i-1)^2)*y2(i-1)+omega2*x2(i-1)+G*C21*(y1(i-1)-y2(i-1)))+G*C23*(y3(i-1)-y2(i-1))*dt;
x3(i)=x3(i-1)+((a3-x3(i-1)^2-y3(i-1)^2)*x3(i-1)-omega3*y3(i-1)+G*C31*(x1(i-1)-x3(i-1)))+G*C32*(x2(i-1)-x3(i-1))*dt;
y3(i)=y3(i-1)+((a3-x3(i-1)^2-y3(i-1)^2)*y3(i-1)+omega3*x3(i-1)+G*C31*(y1(i-1)-y3(i-1)))+G*C32*(y2(i-1)-y3(i-1))*dt;
end
figure
hold on
plot(x1,'r')
plot(x2,'g')
plot(x3,'m')
##### 0 comentariosMostrar -2 comentarios más antiguosOcultar -2 comentarios más antiguos

Iniciar sesión para comentar.

Sam Chak el 19 de Dic. de 2022
I don't know what oscillators are since you didn't provide the math equations to compare with. However, on the programming side, it appears that the location of parenthesis caused the problem. It is possible to randomly shuffle the locations of the brackets by some algorithms until the system responses are stable.
Check if these are the expected responses.
% value of constants
a1 = 0.1;
a2 = 0.2;
a3 = 0.5;
omega1 = 5;
omega2 = 4;
omega3 = 3;
G = 0.01;
C12 = 0.001;
C13 = 0.006;
C21 = 0.003;
C23 = 0.005;
C31 = 0.002;
C32 = 0.004;
dt = 0.01; % step size
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
x1(1) = 0.5;
y1(1) = 0.5;
x2(1) = 1;
y2(1) = 1;
x3(1) = 1.5;
y3(1) = 1.5;
for i = 2:1000
% x1(i) = x1(i-1) + ((a1 - x1(i-1)^2 - y1(i-1)^2)*x1(i-1) - omega1*y1(i-1) + G*C12*(x2(i-1) - x1(i-1))) + G*C13*(x3(i-1) - x1(i-1))*dt;
% y1(i) = y1(i-1) + ((a1 - x1(i-1)^2 - y1(i-1)^2)*y1(i-1) + omega1*x1(i-1) + G*C12*(y2(i-1) - y1(i-1))) + G*C13*(y3(i-1) - y1(i-1))*dt;
% x2(i) = x2(i-1) + ((a2 - x2(i-1)^2 - y2(i-1)^2)*x2(i-1) - omega2*y2(i-1) + G*C21*(x1(i-1) - x2(i-1))) + G*C23*(x3(i-1) - x2(i-1))*dt;
% y2(i) = y2(i-1) + ((a2 - x2(i-1)^2 - y2(i-1)^2)*y2(i-1) + omega2*x2(i-1) + G*C21*(y1(i-1) - y2(i-1))) + G*C23*(y3(i-1) - y2(i-1))*dt;
% x3(i) = x3(i-1) + ((a3 - x3(i-1)^2 - y3(i-1)^2)*x3(i-1) - omega3*y3(i-1) + G*C31*(x1(i-1) - x3(i-1))) + G*C32*(x2(i-1) - x3(i-1))*dt;
% y3(i) = y3(i-1) + ((a3 - x3(i-1)^2 - y3(i-1)^2)*y3(i-1) + omega3*x3(i-1) + G*C31*(y1(i-1) - y3(i-1))) + G*C32*(y2(i-1) - y3(i-1))*dt;
x1(i) = x1(i-1) + ( ( a1 - x1(i-1)^2 - y1(i-1)^2 )*x1(i-1) - omega1*y1(i-1) + G*C12*( x2(i-1) - x1(i-1) ) + G*C13*( x3(i-1) - x1(i-1) ) )*dt;
y1(i) = y1(i-1) + ( ( a1 - x1(i-1)^2 - y1(i-1)^2 )*y1(i-1) + omega1*x1(i-1) + G*C12*( y2(i-1) - y1(i-1) ) + G*C13*( y3(i-1) - y1(i-1) ) )*dt;
x2(i) = x2(i-1) + ( ( a2 - x2(i-1)^2 - y2(i-1)^2 )*x2(i-1) - omega2*y2(i-1) + G*C21*( x1(i-1) - x2(i-1) ) + G*C23*( x3(i-1) - x2(i-1) ) )*dt;
y2(i) = y2(i-1) + ( ( a2 - x2(i-1)^2 - y2(i-1)^2 )*y2(i-1) + omega2*x2(i-1) + G*C21*( y1(i-1) - y2(i-1) ) + G*C23*( y3(i-1) - y2(i-1) ) )*dt;
x3(i) = x3(i-1) + ( ( a3 - x3(i-1)^2 - y3(i-1)^2 )*x3(i-1) - omega3*y3(i-1) + G*C31*( x1(i-1) - x3(i-1) ) + G*C32*( x2(i-1) - x3(i-1) ) )*dt;
y3(i) = y3(i-1) + ( ( a3 - x3(i-1)^2 - y3(i-1)^2 )*y3(i-1) + omega3*x3(i-1) + G*C31*( y1(i-1) - y3(i-1) ) + G*C32*( y2(i-1) - y3(i-1) ) )*dt;
end
figure
hold on
plot(x1)
plot(x2)
plot(x3)
grid on, legend('x', 'y', 'z')
##### 4 comentariosMostrar 2 comentarios más antiguosOcultar 2 comentarios más antiguos
Sam Chak el 19 de Dic. de 2022
This is another version in 3-D.
% value of constants
a1 = 0.1;
a2 = 0.2;
a3 = 0.5;
omega1 = 5;
omega2 = 4;
omega3 = 3;
G = 0.01;
C12 = 0.001;
C13 = 0.006;
C21 = 0.003;
C23 = 0.005;
C31 = 0.002;
C32 = 0.004;
dt = 0.01; % step size
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
x1(1) = 0.5;
y1(1) = 0.5;
x2(1) = 1;
y2(1) = 1;
x3(1) = 1.5;
y3(1) = 1.5;
for i = 2:6000
x1(i) = x1(i-1) + ( ( a1 - x1(i-1)^2 - y1(i-1)^2 )*x1(i-1) - omega1*y1(i-1) + G*C12*( x2(i-1) - x1(i-1) ) + G*C13*( x3(i-1) - x1(i-1) ) )*dt;
y1(i) = y1(i-1) + ( ( a1 - x1(i-1)^2 - y1(i-1)^2 )*y1(i-1) + omega1*x1(i-1) + G*C12*( y2(i-1) - y1(i-1) ) + G*C13*( y3(i-1) - y1(i-1) ) )*dt;
x2(i) = x2(i-1) + ( ( a2 - x2(i-1)^2 - y2(i-1)^2 )*x2(i-1) - omega2*y2(i-1) + G*C21*( x1(i-1) - x2(i-1) ) + G*C23*( x3(i-1) - x2(i-1) ) )*dt;
y2(i) = y2(i-1) + ( ( a2 - x2(i-1)^2 - y2(i-1)^2 )*y2(i-1) + omega2*x2(i-1) + G*C21*( y1(i-1) - y2(i-1) ) + G*C23*( y3(i-1) - y2(i-1) ) )*dt;
x3(i) = x3(i-1) + ( ( a3 - x3(i-1)^2 - y3(i-1)^2 )*x3(i-1) - omega3*y3(i-1) + G*C31*( x1(i-1) - x3(i-1) ) + G*C32*( x2(i-1) - x3(i-1) ) )*dt;
y3(i) = y3(i-1) + ( ( a3 - x3(i-1)^2 - y3(i-1)^2 )*y3(i-1) + omega3*x3(i-1) + G*C31*( y1(i-1) - y3(i-1) ) + G*C32*( y2(i-1) - y3(i-1) ) )*dt;
end
figure
hold on
plot3(x1, x2, x3)
view(45, 30)
Haya Ali el 20 de Dic. de 2022
Thank you for the efforts Sam :)

Iniciar sesión para comentar.

### Categorías

Más información sobre Performance and Memory en Help Center y File Exchange.

### Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by