How can I get rid of this error? Please help me guys
7 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
E = 10e7; poisson = 0.30;
C=E/(1-poisson^2)*[1 poisson 0;poisson 1 0;0 0 (1-poisson)/2];
P = 1e6;
Lx=5; Ly=1;
numberElementsX=20;
numberElementsY=10;
numberElements=numberElementsX*numberElementsY;
[nodeCoordinates, elementNodes] =rectangularMesh(Lx,Ly,numberElementsX,numberElementsY);
xx=nodeCoordinates(:,1);
yy=nodeCoordinates(:,2);
drawingMesh(nodeCoordinates,elementNodes,'Q4','k-');
numberNodes=size(xx,1);
GDof=2*numberNodes;
stiffness=formStiffness2D(GDof,numberElements,elementNodes,numberNodes,nodeCoordinates,C,1,1); % boundary conditions
fixedNodeX=find(nodeCoordinates(:,1)==0);
fixedNodeY=find(nodeCoordinates(:,1)==0); % fixed in YY
prescribedDof=[fixedNodeX; fixedNodeY+numberNodes];
force=zeros(GDof,1);
rightBord=find(nodeCoordinates(:,1)==Lx);
force(rightBord+numberNodes)=P*Ly/numberElementsY;
force(rightBord(1)+numberNodes)=P*Ly/numberElementsY/2;
force(rightBord(end)+numberNodes)=P*Ly/numberElementsY/2;
displacements=solution(GDof,prescribedDof,stiffness,force);
% displacements and deformed shape
disp('Displacements')
jj=1:GDof; format f=[jj; displacements'];
fprintf('node U\n') fprintf('%3d %12.8f\n',f)
UX=displacements(1:numberNodes); UY=displacements(numberNodes+1:GDof);
scaleFactor=0.1; figure
drawingField(nodeCoordinates+scaleFactor*[UX UY],elementNodes,'Q4',UX);%U XX hold on
drawingMesh(nodeCoordinates+scaleFactor*[UX UY],elementNodes,'Q4','k-');
drawingMesh(nodeCoordinates,elementNodes,'Q4','k--');
colorbar
title('U XX (on deformed shape)')
axis off
% stresses at nodes stresses2D(GDof,numberElements,elementNodes,numberNodes,nodeCoordinates,displacements,UX,UY,C,scaleFactor);
''Undefined function or variable "nodeCoordinates".''
[nodeCoordinates, elementNodes] =rectangularMesh(Lx,Ly,numberElementsX,numberElementsY);
6 comentarios
Walter Roberson
el 24 de Feb. de 2023
It has a switch on the requested element type, and calls plot3() or patch() as appropriate.
Respuestas (2)
John D'Errico
el 10 de Abr. de 2015
READ THE ERROR MESSAGE.
So where in this script have you defined the variable nodeCoordinatea?
It was generated by rectangularMesh, a code that is NOT supplied by MathWorks. Try this:
which rectangularMesh -all
Do you have that function? If not, then you will need to download it, as well as its companions from this site:
4 comentarios
loukmane el khaldi
el 14 de Mayo de 2019
I downloaded the files and I tried to execute this file: rectangular Mesh.p but this message appears "Warning: The P-code file MATLABsoftware_rectangularMesh.p was generated prior to MATLAB version 7.5 (R2007b) and will Use MATLABsoftware_rectangularMesh.p using MATLAB R2007b or later. " How do I correct this error? Help me please.
Walter Roberson
el 14 de Mayo de 2019
You can hope that nothing bad happens, but if it fails then you would have to go back go Springer to ask them to update the file, which they would pass along to the author of the book. However I would tend to doubt there would be any actual result.
Alternately if you do not have a Student license (not sure about a Home license) then you can probably use your existing license to access MATLAB R2007a and run the code with that.
waqas
el 26 de Ag. de 2019
You can use following rectangularMesh function to generate the same parameters. I hope this works for your code.
function [nodeCoordinates,elementNodes] = rectangularMesh(Lx,Ly,...
numberElementsX,numberElementsY)
xx = 0:Lx/numberElementsX:Lx;
yy = 0:Ly/numberElementsY:Ly;
[XX YY] = meshgrid(yy,xx);
nodeCoordinates = [YY(:),XX(:)];
elementNodes = zeros(numberElementsX*numberElementsY,4);
j = 1;
i =1;
i1 =0;
counter = 0;
for j = 1:numberElementsY
for i =1: numberElementsX
counter = counter +1;
if i ==1 && j==1
i1 =1;
else
i1 = i1 +1;
end
i2 = i1 + 1;
i4 = i1 + numberElementsX + 1;
i3 = i2 + numberElementsX + 1;
elementNodes(counter,:) = [i1 i2 i3 i4];
end
i1 = i1+1;i2 = i2+1;
end
end
8 comentarios
Aravinthan Chakarapani
el 8 de Nov. de 2021
Hi there Waqas!
How did you get the codes for rectangularmesh? If you wrote it yourself, do you also happen to have codes suitable for drawingmesh?
waqas
el 10 de Nov. de 2021
Hi Arvinthan,
Yes I wrote the code myself for the rectangular mesh. I dont remember writing a drawingmesh.
Ver también
Categorías
Más información sobre Logical en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!