I changed the Target to ADI RF SOM. In HDL Workflow Advisor at 1.3 - Set Target Interface you can select some DIP Switches or Push Buttons as GPIOs for Inputs and LEDs for Outputs. You can also use External Port and provide a list of FPGA Pins at Interface Mapping: {'LSB',...,'MSB'}.
When you type something strange you get a message:
I just changed the overAir signal to be connected to PMOD P11-1 at FPGA pin AC18 (you can find it here) instead of using AXI4-lite. I know, this information can hardly be found in the documentation.
The IO Standard is set to a default setting for External Ports which is LVCMOS25 in this case. You will get a xdc-file:
For the carrier what I have I could also find the xdc on ADI GitHub. The default iostandard we use for external ports is the one from the FMC connector. You don't have such a connector but 162 User-IO pins. The xdc file for the BOB shows FPGA regular IOs where P2 and P13 use the same iostandard (the upper and lower long User-IO pins on your image).
thanks for the quick response , in addition to the question earliar i notice in the xdc file that the p2 port are set to lvcmos25 ? can i set the p2 to be lvcmos33 instead ?
No se puede completar la acción debido a los cambios realizados en la página. Vuelva a cargar la página para ver el estado actualizado.
Translated by
Seleccione un país/idioma
Seleccione un país/idioma para obtener contenido traducido, si está disponible, y ver eventos y ofertas de productos y servicios locales. Según su ubicación geográfica, recomendamos que seleccione: .
También puede seleccionar uno de estos países/idiomas:
Cómo obtener el mejor rendimiento
Seleccione China (en idioma chino o inglés) para obtener el mejor rendimiento. Los sitios web de otros países no están optimizados para ser accedidos desde su ubicación geográfica.