Usage of CSI-RS in 5G NR
3 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
I am reading the examples of 5G toolbox about CSI-RS. In the examlpe it seem we just assume the sequence is known by the receiver and we can do measurements using the known sequence and received signal. My question is how the receiver know which CSI-RS is used? Also, how the receiver know when the CSI-RS is transmitted?
Another question is about beam tracking. CSI-RS can be used for beam tracking right? I cannot find detail explaination about how to do it. Do we use different beamforming vector for several CSI-RS, then get the measurements at receiver and evaluate their quality, just like what we do on SSB?
0 comentarios
Respuestas (1)
Graham Freeland
el 5 de Mayo de 2020
The CSI-RS in use are signalled to a UE through common and dedicated L3/RRC signalling. Take a look at the RRC ASN in 38.331 for an idea of the message contents that are sent semi-statically. Yes, the CSI-RS are used, in conjunction with various measurements, as part of the beam management procedures.
0 comentarios
Ver también
Categorías
Más información sobre Downlink Physical Signals en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!